RE: the unofficial home of the dumas dauntless
 

i started looking at my shafts and the props set way back these shafts were for the drive dogs with the new style props it sets them way back im wondering if the thereds should be cut off a little has anyone had any problems with the props that far back

RE: the unofficial home of the dumas dauntless
 

DS I'd set them back as close as possible to the strut to minimize vibration, maybe put a washer and collar between.

Rich - thanks again for the pulley. Hung it on the davit tonight, shines like a jewel. I totally dig it!

RE: the unofficial home of the dumas dauntless
 

<font size="3">Captains;

I just received an email that the drive shafts I ordered were shipped today.  I'm a little disappointed since the last email received said they would try to get them out Friday but if not them "Monday for sure".  I suppose they can suffer from personnel problems like most other companies.[:o]  Meanwhile I've been working on the motor mounts.

Bob</font>

RE: the unofficial home of the dumas dauntless
 

They'll be there before you know it...That reminds me I should post some updated engineroom pics..

Also the water pumps came in....I am waiting for the water jackets to be in stock so that I can buy them &amp; hook them up. I'll do the pumps at the same time. Tis' a waiting game..

-Rich.

RE: the unofficial home of the dumas dauntless
 

Today I began looking into Dauntles's crew. I have the captain &amp; engineer picked out... http://www.rcuniverse.com/forum/js/f...wink_smile.gif

-Rich.

RE: the unofficial home of the dumas dauntless
 

Hi caps...

Between yesterday &amp; today I found a good crew of people that will ride aboard the Dauntless. There will be 3 men in suites along with a few elegant ladies aboard. I'm still bidding on the captain &amp; engineer but won't reveal who they are are until I have them. All of the people will be in 1:18 scale because it is currently too difficult to find a decent crew in 1:16. I think this will be a good mix of people that will play the part of the modern 1940's-50's wealthy. I'm sure I will add more people later on but this is a start. These little figures add up fast! The Dauntless will be set up as a diorama so each room inside &amp; out will feature people going about their business on the boat. Each room will have a story to tell.

Pics will come once they arrive.

-Rich.

RE: the unofficial home of the dumas dauntless
 

Surely not the head!!!!http://www.rcuniverse.com/forum/js/f...ey/msn/lol.gifhttp://www.rcuniverse.com/forum/js/f...sn/biggrin.gif

Bill

RE: the unofficial home of the dumas dauntless
 

Surely!!! but who dares to peek inside!! http://www.rcuniverse.com/forum/js/f...ey/msn/lol.gif

-Rich.

RE: the unofficial home of the dumas dauntless
 

hi caps im bidding on a new graupner 9.6 700 turbo motor if i win i will be running these motors. well i got a little done started the radar mast.im still wondering if i should cut some of the threds off my shafts to bring the props forward a little

RE: the unofficial home of the dumas dauntless
 

<font size="3">Deep,

I read, on another forum, "the closer the prop to the rudder the better."  He then went further and stated "to try to get the prop no closer than 25% of the prop diameter".  You can check it out here and maybe PM the writer with any further questions and let us know the answer.  http://www.rcgroups.com/forums/showt...rudder+distanc

Bob</font><br type="_moz"/>

RE: the unofficial home of the dumas dauntless
 

<font size="3">Deep,

Another point I just read, the closer the prop to the rudder the more responsive the boat is to rudder commands since the rudder /boat only responds to <u>moving</u> water. Hmm, something else to think about.

Captains,

My drive shafts have arrived, time to go to work.

Bob</font>

RE: the unofficial home of the dumas dauntless
 

thanks i think ill try it the way they are

RE: the unofficial home of the dumas dauntless
 

well i won a new in the box graupner 700 speed turbo motor so thats what ill go with. i spent most of the day cutting one plank at a time for the aft deck there not sanded or finshed yet or glued but i think it look good.still lots of work on the aft deck area before the get instaled

RE: the unofficial home of the dumas dauntless
 

I encountered the same thing when I changed props. I left it as is with no problems and it runs fine. Once you cut the shaft there is no going back.

Bill

RE: the unofficial home of the dumas dauntless
 

o i almost forgot can anyone tell me where i can buy servo pushrods that are close for dauntless i have been looking at you captains boats im trying to copy yours

RE: the unofficial home of the dumas dauntless
 

thanks bill i sort of thought that

RE: the unofficial home of the dumas dauntless
 

DS I love the decking, great work! For my pushrods I just went to the hobby store and bought some universal metal ones made for planes. Then just cut to the right size.

RE: the unofficial home of the dumas dauntless
 

thanks nex time i go ill check it out

RE: the unofficial home of the dumas dauntless
 

Hey DS..this is exactly what I did. I bought a pack of great planes servo pushrod connectors to connect onto the servo &amp; then picked out a metal rod that fits perfectly. These are items that you will find in a local hobby shop &amp; is the same stuff aviation hobbyists use. The rods can easily be cut with a pair of pliers.

-Rich.

RE: the unofficial home of the dumas dauntless
 

thanks

RE: the unofficial home of the dumas dauntless
 

I have used the metal rods from when Bluestakes came and marked were my gas line was at and the flags for sprinkler head marking.

RE: the unofficial home of the dumas dauntless
 

Well I'll be leaving on my cruise to Canada so I won't be here for a while. In the meantime here is a video from yesterday of my latest build and addition to the fleet, Red Baron.

Enjoy
Bill


<dd>http://youtu.be/HOIPxPqO3hY</dd>

RE: the unofficial home of the dumas dauntless
 

Nice Bill!!!!!

What a great boat!!! Nice speeds!!! Nuttin' like a lobstah boat on steroids!! AWESOME!!! http://www.rcuniverse.com/forum/js/f...ades_smile.gif

-Rich.

RE: the unofficial home of the dumas dauntless
 

Hi captains,

I have an entire crew of people coming in over the next few days which will make up the party aboard the Dauntless. In that, I also have the captain of the Dauntless too.

The captain of the Dauntless has an impressive resume. He was once the Admiral of the G.I. Joe Aircraft Carrier USSFlagg. We couldn't expect anyone less to captain the mighty Dauntless.. :)

Meet Captain Keel Haul.. I think he will be a fine captain for the Dauntless.. He likes to be called "Tommy". http://www.rcuniverse.com/forum/js/f...sn/biggrin.gif

While serving aboard the Dauntless his outfit will be changed to all white along withgoldmedals. http://www.rcuniverse.com/forum/js/f...wink_smile.gif



-Rich.

RE: the unofficial home of the dumas dauntless
 

[.