1/16 Hooben/Arkmodel elefant tank build
#76
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Oct 2009
Location: Warren, MI
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/16 Hooben/Arkmodel elefant tank build
ORIGINAL: borealis
I need your help to verify the scale of the hooben model, to compare it with the IMAI one, since there is someone saying that the IMAI elefant was in 1/15 scale, not 1/16.
Can you measure and post the following dimensions of the hooben model:
- lenght withouut barrel
- lenght with barrel
- width
Thank you!
I need your help to verify the scale of the hooben model, to compare it with the IMAI one, since there is someone saying that the IMAI elefant was in 1/15 scale, not 1/16.
Can you measure and post the following dimensions of the hooben model:
- lenght withouut barrel
- lenght with barrel
- width
Thank you!
- length with barrel -19 1/4 inches
- width-8 inches fender to fender
#77
RE: 1/16 Hooben/Arkmodel elefant tank build
Imai always marketed their's as a 1/16 scale model and while gross errors have been made before I doubt they'd be that off.
I agree with Ken, they seem close to me.
I bought the Hooben and while I've not yet built one I propped up the lower and upper hull for a a 'sort of' comparison.
These may make things more confoosing with yer Hoobens but there it 'tis.
Jerry
I agree with Ken, they seem close to me.
I bought the Hooben and while I've not yet built one I propped up the lower and upper hull for a a 'sort of' comparison.
These may make things more confoosing with yer Hoobens but there it 'tis.
Jerry
#79
RE: 1/16 Hooben/Arkmodel elefant tank build
These may make things more confoosing with yer Hoobens but there it 'tis.
I used to own 2 IMAI and while I always thought this model was darn good and accurate, I remember the part that was really not in 16th scale was the muzzle break (I read that it was taken from a 15th scale model of the Tiger made by Bandai). It was way too big compared to my other 16th models.
#80
Join Date: Jan 2007
Location: San Paolo Solbrito, ITALY
Posts: 1,536
Likes: 0
Received 17 Likes
on
15 Posts
RE: 1/16 Hooben/Arkmodel elefant tank build
Thanks Viper54 for the dimensions and Tanque for the side by side comparison.
After some calculations looks like the IMAI elefant is in about a 1:15.5 scale, while the Hooben one is about 1:16.6
After some calculations looks like the IMAI elefant is in about a 1:15.5 scale, while the Hooben one is about 1:16.6