JerB

Hi Guys

My one HL tanks is acting a little weird. When I turn the tank on it causes the sprockets to spin by themselves? I have tried changing the remote and the crystals but still the same problem. Would anybody have any ideas?

Jeremy

CHIEFSONN

center the trim on the transmitter

tisaksen

If that fails there is always

JerB

Hey Guys,

I tried to center the trim but still have the problem.

tisaksen

Do you have another receiver board or rx18 (control board) you can try ?

Glen B

If you don't mind a drive to the Niagara area, we have a Can Am R/C Tank Club meet scheduled for Oct. 6th at our field in Stevensville; someone there should be able to sort it out, in person.

Details are on the link, the loaction map is near the bottom of the page, here: http://can-amrctankclub.blogspot.ca/

Airbrushler

maybe it's just the controler acting up try a different controler if you have one

blitzkrieg65

Either the RX-18 has failed or you plugged the 2 pin plug for the power directly into the motor slot on the RX-18 board.

Phil