Puma has arrived!! 1st unboxing pics
#176
Thread Starter
Do you have the latest El-Mod software? Sometime in the past I can remember scratching my head wondering why I couldn't change parameters that others were suggesting, and it turned out that my software was out of date and not showing me all of the available parameters.
Also, yes the motor will have an effect - they suggested 55T or more I believe? El-Mod typically isn't very tolerant of unusual motor / gearbox combo's when trying to set the inertia up.
Also, yes the motor will have an effect - they suggested 55T or more I believe? El-Mod typically isn't very tolerant of unusual motor / gearbox combo's when trying to set the inertia up.
#178
Thread Starter
Peter at xion said he was getting 1/2 meter stopping distances I'm guessing with the recommended 55T motor so I can only deduce my results are from the lower turn motor.
#179
Senior Member
I understand your "Need for speed" Brett but I recall that even the real Puma was very top heavy and rolled easy due to its long and narrow profile. I hope it goes better for you than it did the Wehrmacht. Once you put the upper hull, then turret, then apple on it.... it will be top heavy and have a high COG pal.
#180
Thread Starter
I understand your "Need for speed" Brett but I recall that even the real Puma was very top heavy and rolled easy due to its long and narrow profile. I hope it goes better for you than it did the Wehrmacht. Once you put the upper hull, then turret, then apple on it.... it will be top heavy and have a high COG pal.
Last edited by TheBennyB; 09-16-2015 at 11:26 AM.
#181
And now I have a mental image of Bob prep-ing one of his girls to have the video camera pointed at Brett's face the first time he corners too fast, and has that look of "NOOOOOOOO!!!!" as it rolls over and over, smashing all of the external fittings off...
I miss you guys
I miss you guys
#182
Thread Starter
And now I have a mental image of Bob prep-ing one of his girls to have the video camera pointed at Brett's face the first time he corners too fast, and has that look of "NOOOOOOOO!!!!" as it rolls over and over, smashing all of the external fittings off...
I miss you guys
I miss you guys
#184
My Feedback: (1)
Bret, so you are not using the standard Fusion Eco board in this thing? It is the truck system? I am confused because according to my research, the normal "tank" boards are capable of being used to drive a single motor vehicle and use a servo for steering, which would make more sense to me. In any case, let me know how it progresses. I will be happy to try to help if possible. Jim will be in D'ville so he can call me and we can try to work through it together.
#185
Thread Starter
Joe, it seems to be a frankenboard. It only has outputs for one motor but still has all the other usual plugs including the battle system. You can see in the pic, black red are power and blue and yellow are motor leads.
#187
I got my Mato speakers yesterday, they sound quite okey! For their size you can get a really loud sound.. Worth the money, probely the only speakers that will fit inside the Puma. Got some problems figuring out where all the wires from the el mod board should go into the reciver, they colored coded but cant find what goes where..
//Sebbe
//Sebbe
#188
Junior Member
Join Date: Feb 2012
Location: Nuremberg, GERMANY
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Manual Page 5:
~
~
I got my Mato speakers yesterday, they sound quite okey! For their size you can get a really loud sound.. Worth the money, probely the only speakers that will fit inside the Puma. Got some problems figuring out where all the wires from the el mod board should go into the reciver, they colored coded but cant find what goes where..
//Sebbe
//Sebbe
#191
Argh alot of problems just to get the chassi running. Now i have problem with the plastic fasteners for the steering servo. The steering servo requires a lot of torque and the damn plastic holders bends when i test the steering... have to make new in metal at work...
//Sebbe
#192
Thread Starter
Argh alot of problems just to get the chassi running. Now i have problem with the plastic fasteners for the steering servo. The steering servo requires a lot of torque and the damn plastic holders bends when i test the steering... have to make new in metal at work...
//Sebbe
bottom of the motor causing the motor to raise (resistance) and making the servo move as well. Mine still move a bit but don't mind it as I kinda think of it as a servo saver.
#193
Thread Starter
Well we had no luck downloading the latest version of the pc configuration software on my buddies pc at Danville to check my parameters on the elmod board.
Going to get back into that after he figures that out and I send him some screen shots of my settings to see if there is anywhere else to adjust for inertia.
Other than that the lower is pretty much done so I'm starting to model the upper and do some research on paint scheme's though there aren't many choices
on that. Once I get some upper work done I'll post some pics.
Going to get back into that after he figures that out and I send him some screen shots of my settings to see if there is anywhere else to adjust for inertia.
Other than that the lower is pretty much done so I'm starting to model the upper and do some research on paint scheme's though there aren't many choices
on that. Once I get some upper work done I'll post some pics.
#194
Still havnt made metalholder for servo but did take a testdrive anyway. Feels a bit strange on throttle and motor braking. Would be nice to set these parameters.
Did a quick video he he https://youtu.be/kUo7ov43eN8
//Sebbe
Did a quick video he he https://youtu.be/kUo7ov43eN8
//Sebbe
#199
Thread Starter