Matomart 2.4GHz RC controller
#1
Member
Thread Starter
Join Date: Oct 2013
Location: London, Ontario
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Matomart 2.4GHz RC controller
Hello All
It has been awhile. I recently have "almost" completed my upgrades on my HL Leo II. Put the batteries back into the Remote and zip, nadda, nothing. Changed the batteries, made sure they were in the correct way, no light comes on when I switch on the power. Not being the electronically gifted individual, any ideas, suggestions, fixes.....
It has been awhile. I recently have "almost" completed my upgrades on my HL Leo II. Put the batteries back into the Remote and zip, nadda, nothing. Changed the batteries, made sure they were in the correct way, no light comes on when I switch on the power. Not being the electronically gifted individual, any ideas, suggestions, fixes.....
#3
I've heard you need to remove the dividers between the batteries. Can you do any testing? Open the TX and check for voltage at the battery box. If none, it's because the dividers are preventing good contact between batteries.
#5
Member
Thread Starter
Join Date: Oct 2013
Location: London, Ontario
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Sometimes it doesn't pay to get out of bed. Max-U52 you were spot on, I must not have seated them correctly - ROOKIE :-) me! Well it moves and the metal track sounds great, now I need to figure out why the rewired rear lights are not working! TIme to call a friend.