Tagen Recoil / flash to HL motherboard / electronics?
#1
Thread Starter
Tagen Recoil / flash to HL motherboard / electronics?
Hey everyone, While working on a HL M4A3 that has been converted to a Jumbo I want to replace the airsoft gun with a recoil / flash system from Taigen. I found a unit for the recoil, http://www.imex-model.com/product/TA...UNIT.html?cid= but was wondering if it is compatible with the stock HL sherman electronics. Is is a plug and play, or will I need to break out the soldering iron? Or if HL has a drop in system that I'm unaware of
BTW the HL sherman in question is the following unit, https://www.rctankwarfare.co.uk/foru...8959&mode=view and has the 2.4ghz stock setup
Any help would be appreciated
BTW the HL sherman in question is the following unit, https://www.rctankwarfare.co.uk/foru...8959&mode=view and has the 2.4ghz stock setup
Any help would be appreciated