OFNA Truggy - Novak Capacitor Help
06-02-2016, 03:51 PM
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Jun 2011
Location: Danbury, NH
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
OFNA Truggy - Novak Capacitor Help
Hey,
I have a OFNA Truggy with a Novak HV 6.5 Brushless system. I took it out today after years of not using it, and the capacitor started smoking and lit on fire when i plugged the batteries in. I ended up snipping the capacitor right off and everything works perfectly. I have two questions. 1) is the capacitor necessary? 2) How do i know which capacitor to replace it with. It's all burned on the top and I can't tell what it was. I do have some pictures that may be helpful. Any help would be greatly appreciated!
This is my exact system:
http://teamnovak.com/products/brushl...axx/index.html
This seems to be the manual for it:
http://teamnovak.com/file_download/1..._pro_instr.pdf
Photos:
I have a OFNA Truggy with a Novak HV 6.5 Brushless system. I took it out today after years of not using it, and the capacitor started smoking and lit on fire when i plugged the batteries in. I ended up snipping the capacitor right off and everything works perfectly. I have two questions. 1) is the capacitor necessary? 2) How do i know which capacitor to replace it with. It's all burned on the top and I can't tell what it was. I do have some pictures that may be helpful. Any help would be greatly appreciated!
This is my exact system:
http://teamnovak.com/products/brushl...axx/index.html
This seems to be the manual for it:
http://teamnovak.com/file_download/1..._pro_instr.pdf
Photos:
12-04-2016, 04:08 AM
#3
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Jun 2011
Location: Danbury, NH
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
