Go Back  RCU Forums > RC Cars, Buggies, Trucks, Tanks and more > RC Truggy
Reload this Page >

Broke in my new Jammin today

Notices
RC Truggy Trucks and buggies together make a truggy. Discuss all things truggy right here.

Broke in my new Jammin today

Old 03-11-2006, 02:36 PM
  #1  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default Broke in my new Jammin today

Well i got to start up my new Jammin today . It fired right up after about 20 seconds .Then i was able to let it go back and forth in this large dirt area.There is a long paved road with large dirt areas to either side ran it 200feet one way the back the other wich was easy on the truck. I was able to heat cyle it about 5 times so far and got 3 tanks through it.It starts right up and the roto start system is great.only tweeks i have to make are adjusting the servo arm for the steering ,,, it was pulling slightly to the right with full trim. and i have to lower the idle setting so it will settle down abit .. its was a pinch too high.I think those adjustments are all set now .Ill check it next time out .The truck is running with plenty of smoke , a good puff with each blip of the gas // so i can lean it out a little soon into the next few tanks.I havent made any full throttle runs yet but i can see the stock engine has plenty of grunt.No idleing on a box for this thing and im sure that was the best way to do it .
Old 03-11-2006, 03:02 PM
  #2  
annie_himself
Senior Member
 
annie_himself's Avatar
 
Join Date: Oct 2004
Location: Prairiville, LA
Posts: 6,254
Likes: 0
Received 1 Like on 1 Post
Default RE: Broke in my new Jammin today

Wow, sounds like you had fun, have any pics?
Old 03-11-2006, 04:26 PM
  #3  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

<img src="http://img99.imageshack.us/img99/1251/photo00049sl.png" alt="Image Hosted by ImageShack.us" /> If that link photo works then ill be able to get a few of my CRT
Old 03-11-2006, 04:28 PM
  #4  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

http://img99.imageshack.us/my.php?im...oto00049sl.png
Old 03-11-2006, 04:50 PM
  #5  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

http://img400.imageshack.us/my.php?i...mpic2401pa.jpg
Old 03-11-2006, 05:49 PM
  #6  
annie_himself
Senior Member
 
annie_himself's Avatar
 
Join Date: Oct 2004
Location: Prairiville, LA
Posts: 6,254
Likes: 0
Received 1 Like on 1 Post
Default RE: Broke in my new Jammin today

Nice gun and blurry pic. lol
You gonna take it to a track or just bash it?
Old 03-11-2006, 06:37 PM
  #7  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

hey just charged my batteries back up and the car doesnt want to turn back on hummm grrrr i hope the radio gear comes to life .
Old 03-11-2006, 06:47 PM
  #8  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

I hope this stock radio gear doesnt give me trouble everytime I have to unplug the batteries to charge them..we dont have a track here but my friend has a tmaxx and maybe a few other guys will pick up an Rc i hope we will get to crash around together,,we could set out some cones for a track .sorry about the blurry picture . The camera is a pocket cam about the size of a credit card and yes that 357 is really a keeper.
Old 03-11-2006, 10:20 PM
  #9  
mayhem272
Senior Member
 
mayhem272's Avatar
 
Join Date: Sep 2005
Location: Pittsburgh, PA
Posts: 572
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

nice
i plan on gettin one soon
is it fast? my lhs said its plenty for all around usage
just have to pick up some road hawgs
they also recomend a new steering servo a high torque model
Old 03-12-2006, 07:30 AM
  #10  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

Hey mayhem, yes i would say its pretty fast although i havent floored it yet.I was running it in a wide open area with lots of room and it was a handfull. The .28 engine has lots of torque.I dont know about others but i like the rotostart system to.i can see this engine will be a breeze to start. its lights right up.I did wash the thing when i was done and didnt realize it but i got the servos wet.it was funny even a cop car came back there and did a half dohnut.
Old 03-12-2006, 12:29 PM
  #11  
mayhem272
Senior Member
 
mayhem272's Avatar
 
Join Date: Sep 2005
Location: Pittsburgh, PA
Posts: 572
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today


ORIGINAL: AUTOMAG

Hey mayhem, yes i would say its pretty fast although i havent floored it yet.I was running it in a wide open area with lots of room and it was a handfull. The .28 engine has lots of torque.I dont know about others but i like the rotostart system to.i can see this engine will be a breeze to start. its lights right up.I did wash the thing when i was done and didnt realize it but i got the servos wet.it was funny even a cop car came back there and did a half dohnut.
nice yea my mayhem has a26 and shaftstarter and i love it
Old 03-12-2006, 01:14 PM
  #12  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

i have been trying to dry my reciever with a hair dryer . do you guys think the radio function will return ??? i f;ip the switch and only get a slight twich in the throttle servo nothing on the steering and no other function... i should have just left it dirty.. being clean will cost me money now
Old 03-12-2006, 01:16 PM
  #13  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

Mayhem i wish i could race you to see whos got more top speed..
Old 03-13-2006, 07:39 PM
  #14  
AUTOMAG
Senior Member
Thread Starter
 
Join Date: Feb 2006
Location: White Plains, NY
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Broke in my new Jammin today

Well today I upgraded my radio.I went and got a Futaba magnum 3Pm , fm, set up. Its really much nicer than the stock am radio.. I also sealed up the reciever in a plastic bag tight as possible to avoid water getting to it at anytime.. The stock steering servo seems to be doing the job but ill probably get a better one and us that one for throttle work.Its nice to be up and running again I have a question . is the gold colored screw the throttle stop screw on this thing ??? the dirrections were unclear to me .. the angled smaller screw would be the LSN correct ???

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.