RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC Truggy (http://www.rcuniverse.com/forum/rc-truggy-399/)
-   -   ofna x1 crt (http://www.rcuniverse.com/forum/rc-truggy-399/11255318-ofna-x1-crt.html)

doug702 10-08-2012 10:37 AM

ofna x1 crt
i just got a very nice used ofna x1 crt, not sure of pro or rtr version. all i know is that when i put in my sh.28 motor the backplate/pullstart causes the engine to tilt foward. is there a set of mounts to fix this? do i have to run a motor with no pullstart? are there differences in the chassis between rtr and pro version?

doug702 10-08-2012 11:38 AM

RE: ofna x1 crt
any help/info will be appreciated

doug702 10-08-2012 02:01 PM

RE: ofna x1 crt
anyone selling a starterbox, i think im just gonna change the motor to non ps

hope its ok to ask for items in here

Anthoop 10-11-2012 09:43 AM

RE: ofna x1 crt
You could raise the engine or the mounts using flat washers...always ensure the screws are long enough to provide a reasonable amount of thread engagement.

doug702 10-11-2012 09:59 AM

RE: ofna x1 crt
i tried that and now the engine is to close even at its farthest point away from the spur gear. i could open up the engine mounting oles on the chassis but that is not something i really want to do.
thanks for the tip though.

Anthoop 10-11-2012 10:57 AM

RE: ofna x1 crt
Possible to file some material from the bottom of the pullstart/backplate?
What size pinion are you using?

doug702 10-11-2012 11:13 AM

RE: ofna x1 crt
id like to use a 16 or 17 tooth bell. ill try and file off the bottom of the pull start thanks. that just might work

All times are GMT -8. The time now is 04:35 AM.