CARF F4U-1 Corsair build thread
#2756
Thread Starter
My Feedback: (221)
Gary
#2759
Thread Starter
My Feedback: (221)
Pictures of the way the elevators are attached to the torque rod. I tape the two elevators in place using the roots molded into the fuselage to line them up. You can trust them. They are perfect. Hope this helps Tom.
Last edited by ram3500-RCU; 08-09-2014 at 06:17 PM.
#2763
Thread Starter
My Feedback: (221)
The Alliance event is this Saturday. I thought yours was next week. Did I get that wrong?
We wanted to fly at these upcoming local events:
-Alliance war Bird event
-Cleveland war bird event (yours)
-Cleveland National air show
We have missed some other fine local events due to scheduling conflicts or poor weather conditions for our aircraft.
Later this year the DiGorgio memorial event in Atlanta and possibly 12 O'clock High in Lakeland.
I was also invited to compete at the Scale Masters championship in late September. Not sure on that one.
We wanted to fly at these upcoming local events:
-Alliance war Bird event
-Cleveland war bird event (yours)
-Cleveland National air show
We have missed some other fine local events due to scheduling conflicts or poor weather conditions for our aircraft.
Later this year the DiGorgio memorial event in Atlanta and possibly 12 O'clock High in Lakeland.
I was also invited to compete at the Scale Masters championship in late September. Not sure on that one.
Last edited by ram3500-RCU; 08-11-2014 at 06:09 PM.
#2765
My Feedback: (158)
The Alliance event is this Saturday. I thought yours was next week. Did I get that wrong?
We wanted to fly at these upcoming local events:
-Alliance war Bird event
-Cleveland war bird event (yours)
-Cleveland National air show
We have missed some other fine local events due to scheduling conflicts or poor weather conditions for our aircraft.
Later this year the DiGorgio memorial event in Atlanta and possibly 12 O'clock High in Lakeland.
I was also invited to compete at the Scale Masters championship in late September. Not sure on that one.
We wanted to fly at these upcoming local events:
-Alliance war Bird event
-Cleveland war bird event (yours)
-Cleveland National air show
We have missed some other fine local events due to scheduling conflicts or poor weather conditions for our aircraft.
Later this year the DiGorgio memorial event in Atlanta and possibly 12 O'clock High in Lakeland.
I was also invited to compete at the Scale Masters championship in late September. Not sure on that one.
#2772
Junior Member
Join Date: Jan 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hi everybody
I have a question for the motors. It's possible to install moki 300 in the corsair. The diameter is 122, 05 inch. If I compare with moki 250, the diameter is 120.07 inch.
The weight for the moki 300 is more high than 1.5 livres.
Thanks
Xavier
I have a question for the motors. It's possible to install moki 300 in the corsair. The diameter is 122, 05 inch. If I compare with moki 250, the diameter is 120.07 inch.
The weight for the moki 300 is more high than 1.5 livres.
Thanks
Xavier
#2773
Thread Starter
My Feedback: (221)
On the 300, no, it will not fit. This plane had outstanding performance on the 215. The 250 is way more than it needs. I can see no advantage to going any larger even if you could. Just not necessary. You'll fly her at 1/2 throttle with the 250. My opinion for what it's worth.