ESM 50cc ME-109
#501
My Feedback: (8)
RE: ESM 50cc ME-109
Update on the shindinmachine landing gear...Lenny is doing some R&D and has already improved the gear for this plane...going to a larger lower strut so he can include the 1/4 inch axles as well as including stronger oleo springs. The pictured gear have the original struts and axles but Lenny they go back for the upgrades These will be excellent changes. He is also completing the tail wheel for this beauty Cant wait for that as well. Thanks Lenny
#502
My Feedback: (157)
RE: ESM 50cc ME-109
ORIGINAL: n8622t
Hey Ram do you detect any thrust angles in the firewall...Have some ideas on that
Hey Ram do you detect any thrust angles in the firewall...Have some ideas on that
I've yet to get to the engine but I'll do it per the instructions if possible. Thanks for the parts! I plan on putting them to good use here soon. My bird is built and now the electronics are going in. I spent a few hours on the inner flaps today.. Well worth the changes I made here. Looks more accurate.
#504
Junior Member
Join Date: Jun 2006
Location: , AUSTRALIA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: ESM 50cc ME-109
Hey Ramstein, Its an 18x10 Hamilton prop that I'll be puting on a Hurrincane that I'm just in the process of fiberglassing. I'll be puting a 3 blade Solar prop on my 109.
#505
My Feedback: (157)
RE: ESM 50cc ME-109
It looks good. A solo prop..., must be nice, my landing say, buy cheap.. Especially with a 109..
More pics. I have much to do but I'm running out of things to customize and that what I enjoy the most!the engine is just in ther for reference and they'll both be completed when I get a spinner. I was seriously considering asking someone from down under to send me a spinner as who knows when we'll get them in the states!
More pics. I have much to do but I'm running out of things to customize and that what I enjoy the most!the engine is just in ther for reference and they'll both be completed when I get a spinner. I was seriously considering asking someone from down under to send me a spinner as who knows when we'll get them in the states!
#506
Junior Member
Join Date: Jun 2006
Location: , AUSTRALIA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: ESM 50cc ME-109
If you email Steve at [email protected] he will send you one out really quick. He had 2 and 3 blade spinners in stock last week. I think I paid around $85 for mine. He mails overseas too. Its the only place I was able to pick one up. Theyre fairly pricey, but they are a huge spinner and look to be made pretty well and from what Ive found, are the only size that matches this model.
#508
RE: ESM 50cc ME-109
Received my Bf109G last weekend, but it have some errors I hate to see. The bottom of the fuselage behind the wing and bottom of the cowling is way to round. They are almost flat at the original aircraft. And the radiatorflaps are hinged in the wing, and not the radiator [:@]
I had planned to install a Laser300V, but the shape of the cowling will leave the sylinderhead outside of the cowling[&:] And the crosses on the fuselage dont follow the datumline of the fuse.
Guess I will try to sell it again.
I had planned to install a Laser300V, but the shape of the cowling will leave the sylinderhead outside of the cowling[&:] And the crosses on the fuselage dont follow the datumline of the fuse.
Guess I will try to sell it again.
#509
Junior Member
Join Date: Jun 2006
Location: , AUSTRALIA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: ESM 50cc ME-109
Yeah, youd think for such a crutial component of this model, they would be a little more readily available! I had no luck at all locating a spinner, until I emailed ESM directly. They put me on to Austars-Model and BINGO! Got one. The guy I emailed at ESM's name is Herlin and he was very helpful. His email address is [email protected]. Maybe he can put you onto one in the USA. If not? Im sure Austars will post one out to you.
Oh, does anyone know of any BF109 F or early G models that had a bare metal finish? I've got a large roll of flight skinz ( like flight metal ) that would look great all over a 109, but I want an accurate scheme. The only one I have come accros is this one http://www.largescaleplanes.com/arti...le.php?aid=628
Cheers
Oh, does anyone know of any BF109 F or early G models that had a bare metal finish? I've got a large roll of flight skinz ( like flight metal ) that would look great all over a 109, but I want an accurate scheme. The only one I have come accros is this one http://www.largescaleplanes.com/arti...le.php?aid=628
Cheers
#510
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
RE: ESM 50cc ME-109
ORIGINAL: Piggymac
Oh, does anyone know of any BF109 F or early G models that had a bare metal finish?
Oh, does anyone know of any BF109 F or early G models that had a bare metal finish?
#511
My Feedback: (157)
RE: ESM 50cc ME-109
ORIGINAL: Piggymac
Yeah, youd think for such a crutial component of this model, they would be a little more readily available! I had no luck at all locating a spinner, until I emailed ESM directly. They put me on to Austars-Model and BINGO! Got one. The guy I emailed at ESM's name is Herlin and he was very helpful. His email address is [email protected]. Maybe he can put you onto one in the USA. If not? Im sure Austars will post one out to you.
Oh, does anyone know of any BF109 F or early G models that had a bare metal finish? I've got a large roll of flight skinz ( like flight metal ) that would look great all over a 109, but I want an accurate scheme. The only one I have come accros is this one http://www.largescaleplanes.com/arti...le.php?aid=628
Cheers
Yeah, youd think for such a crutial component of this model, they would be a little more readily available! I had no luck at all locating a spinner, until I emailed ESM directly. They put me on to Austars-Model and BINGO! Got one. The guy I emailed at ESM's name is Herlin and he was very helpful. His email address is [email protected]. Maybe he can put you onto one in the USA. If not? Im sure Austars will post one out to you.
Oh, does anyone know of any BF109 F or early G models that had a bare metal finish? I've got a large roll of flight skinz ( like flight metal ) that would look great all over a 109, but I want an accurate scheme. The only one I have come accros is this one http://www.largescaleplanes.com/arti...le.php?aid=628
Cheers
It's where I go for schemes.
#514
My Feedback: (8)
RE: ESM 50cc ME-109
ORIGINAL: Piggymac
If you email Steve at [email protected] he will send you one out really quick. He had 2 and 3 blade spinners in stock last week. I think I paid around $85 for mine. He mails overseas too. Its the only place I was able to pick one up. Theyre fairly pricey, but they are a huge spinner and look to be made pretty well and from what Ive found, are the only size that matches this model.
If you email Steve at [email protected] he will send you one out really quick. He had 2 and 3 blade spinners in stock last week. I think I paid around $85 for mine. He mails overseas too. Its the only place I was able to pick one up. Theyre fairly pricey, but they are a huge spinner and look to be made pretty well and from what Ive found, are the only size that matches this model.
LOL maybe you could give them a call for me...
#515
RE: ESM 50cc ME-109
ORIGINAL: n8622t
Got a little good news...the cowl nose has some down thrust built in however, no right thrust Cockpit hatch is finished Thanks for the help Ram...couldnt have done it without ya.
Got a little good news...the cowl nose has some down thrust built in however, no right thrust Cockpit hatch is finished Thanks for the help Ram...couldnt have done it without ya.
#516
My Feedback: (8)
RE: ESM 50cc ME-109
because when you have a hobby lobby just around the corner you use what they have with no problem...besides when they get painted you wont even know that they are hobby lobby hinges Are'nt they purdy who's nelson anyway???? Didnt know he had the corner on the hinge market...lol
#517
My Feedback: (157)
RE: ESM 50cc ME-109
Looking awesome N8622t, I used Nelsons hinges on mine. On the canopy and the switch hatch. They're cool and all but I've used hinges from Lowes that worked perfect too. I guess it's just a matter of choice and absolutely convience! If I hadn't ordered so many sets of the Nelsons piano hinges, I would've been off to Lowes!
I just spent another few hundred at the LHS.. receivers and misilanious small things for is bird. My receiver uses lipo batteries so I'm off to make another order from hobby king. hopefully this time, they get it right!
I just spent another few hundred at the LHS.. receivers and misilanious small things for is bird. My receiver uses lipo batteries so I'm off to make another order from hobby king. hopefully this time, they get it right!
#519
RE: ESM 50cc ME-109
ORIGINAL: n8622t
because when you have a hobby lobby just around the corner you use what they have with no problem...besides when they get painted you wont even know that they are hobby lobby hinges Are'nt they purdy who's nelson anyway???? Didnt know he had the corner on the hinge market...lol
because when you have a hobby lobby just around the corner you use what they have with no problem...besides when they get painted you wont even know that they are hobby lobby hinges Are'nt they purdy who's nelson anyway???? Didnt know he had the corner on the hinge market...lol
Your cockpit looks real cute! Very nice indeed!
Nelson are on the leading edge regarding scale hinges.
But yes, of course, we all use what we prefer best.
Here;
http://www.nelsonhobby.com/miniature_piano_hinges.php
I find the "Miniature 5/8" flange width" best. More space for the screws.
I just tried them on my 50cc Corsair, and will use them on the tail wheel doors too.
#521
My Feedback: (157)
RE: ESM 50cc ME-109
ORIGINAL: n8622t
Thanks Ram....you are appreciated and isn't it amazing how small the packages are after a $200 visit to the LHS
Thanks Ram....you are appreciated and isn't it amazing how small the packages are after a $200 visit to the LHS
#522
Junior Member
Join Date: Jun 2006
Location: , AUSTRALIA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
RE: ESM 50cc ME-109
Hey n8622t,
Dont know them well. Ive purchased a couple of things from them. Same when I bought my 109 from them, I paid through Paypal, then didnt hear a thing, but it turned up quite quickly in the post. I dont think you'll have any worries with them. LOL< no I wouldnt think theyre anti Yank..
Dont know them well. Ive purchased a couple of things from them. Same when I bought my 109 from them, I paid through Paypal, then didnt hear a thing, but it turned up quite quickly in the post. I dont think you'll have any worries with them. LOL< no I wouldnt think theyre anti Yank..