TF FW190 GIANT ARF
#403
Member
Join Date: Aug 2011
Location: Texas TX
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: TF FW190 GIANT ARF
Try this link...
http://www.vogelsang-aeroscale.com/fw190scaleparts.html
Left is 1/4 and Right is 1/5
http://www.vogelsang-aeroscale.com/fw190scaleparts.html
Left is 1/4 and Right is 1/5
ORIGINAL: MANFRED
I remember seeing a European company that sold some really scale detailed accessories for a 1/5 Fw and they had a really cool looking Drop tank, Wheels etc etc. anybody know who that is?
I remember seeing a European company that sold some really scale detailed accessories for a 1/5 Fw and they had a really cool looking Drop tank, Wheels etc etc. anybody know who that is?
#405
My Feedback: (28)
RE: TF FW190 GIANT ARF
Well not a good day. On the maiden the motor quit about 20 ft in the air. Not enough airspeed to even glide. Luckily it didnt snap, just mushed in nose first. Ripped out the gear and broke the cowl. It continues, fired up my YA P-40 and promptly got a hard over rudder. Spun in...total lose. Time for a cold beer....or several. When I settle down I'll look at the wing to see if it can be repaired and talk to Tower about a replacement wing........2 take offs...0 landings = suck day. Oh yeah, and last night I broke the nose retract on my Composite ARF Ultra Flash. Maybe some good Glenlevit instead of beer! Tomorrow I'm playing golf!
#408
My Feedback: (28)
RE: TF FW190 GIANT ARF
Well after seeing a new wing is $400 I decided to try a rebuild. Retracts are severely damaged and will require new frames. The wing is better that I thought. I pulled the covering off, tore off the damaged sheeting and removed the broken gear mounting rails. I made a pattern and started cutting the ply parts. The ribs that the gear mounts key into are not damaged badly and will not require replacement. I will probably have the ply parts ready to reinstall tomorrow but will have to wait till I get me retracts repaired before gluing them in. The sheeting will have to wait until the structure is rebuilt but I see no major problems. Estimated cost of the rebuild will be less than $50 for the wing plus the cost of the retract parts. The cowl will require some work and I will make temp repair until after the airplane is successfully flown, then I will replace the cowl. No damage to the fuselage. Overall not a bad crash.
#409
RE: TF FW190 GIANT ARF
If any of you boys need some tail dressing just let me know. I can make you a paint mask or just a good old black sticker. I just shot them on my current project
#412
My Feedback: (19)
Join Date: Mar 2002
Location: joliet, IL
Posts: 1,596
Likes: 0
Received 0 Likes
on
0 Posts
RE: TF FW190 GIANT ARF
Charles, given that the emblem has four colors to it, it might make things a lot easier and less money to do that one as a dry transfer...Getstencils is good at those.
#414
My Feedback: (157)
RE: TF FW190 GIANT ARF
Thanks wulf, I really want to paint them on or at least have them made from vinyl. I did the dry transfer thing on my ME-109 and they didn't last long. I got some really good dry transfers from Fighteraces though.
OK, this is what I need. All markings for this,cowl emblem, number 6 and tail swastika .shoot me a PM.
OK, this is what I need. All markings for this,cowl emblem, number 6 and tail swastika .shoot me a PM.
#415
Member
Join Date: Aug 2011
Location: Texas TX
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: TF FW190 GIANT ARF
Farmer... Didn't you have a thread for this build? I could have sworn I subscribed to it??
Is it still out thereor didI just miss signing up? Molting looks fantastic!
Is it still out thereor didI just miss signing up? Molting looks fantastic!
ORIGINAL: tfarmer96
I just shot them on my current project
I just shot them on my current project
#416
My Feedback: (19)
Join Date: Mar 2002
Location: joliet, IL
Posts: 1,596
Likes: 0
Received 0 Likes
on
0 Posts
RE: TF FW190 GIANT ARF
ORIGINAL: Ramstein44
Thanks wulf, I really want to pain them on or at least have them made from vinyl. I did the dry transfer thing on my ME-109 and they didn't last long. I got some really good dry transfers from Fighteraces though.
OK, this is what I need. All markings for this,cowl emblem, number 6 and tail swastika .shoot me a PM.
Thanks wulf, I really want to pain them on or at least have them made from vinyl. I did the dry transfer thing on my ME-109 and they didn't last long. I got some really good dry transfers from Fighteraces though.
OK, this is what I need. All markings for this,cowl emblem, number 6 and tail swastika .shoot me a PM.
I hear ya on painting them on. I used a Getstencils dry transfer for the badges on my 190A and they were awesome. I get to do the next cowling as a checkerboard, so I get to do all that masking anyway it seems.
#420
RE: TF FW190 GIANT ARF
ORIGINAL: Ramstein44
Thanks wulf, I really want to paint them on or at least have them made from vinyl. I did the dry transfer thing on my ME-109 and they didn't last long. I got some really good dry transfers from Fighteraces though.
OK, this is what I need. All markings for this,cowl emblem, number 6 and tail swastika .shoot me a PM.
Thanks wulf, I really want to paint them on or at least have them made from vinyl. I did the dry transfer thing on my ME-109 and they didn't last long. I got some really good dry transfers from Fighteraces though.
OK, this is what I need. All markings for this,cowl emblem, number 6 and tail swastika .shoot me a PM.
As an existing customer you know ill take care of you
#424
My Feedback: (11)
Join Date: Oct 2002
Location: Louisville, KY
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
RE: TF FW190 GIANT ARF
ORIGINAL: Ramstein44
I'm flying my Platt 190A, Sist 190A, Topflite 190D9, ESM 190A, ESM 190D9, and a Platt 190A, Holman 190D9 and skyshark D9 under the works. Not to mention the four FW190 foamies..
At some point, I'll start my Anderson TA152 and Hopefully the captured P-47 razorback. But I have a funny feeling that someone here (not saying any names) will have me building a Meister 190A for them instead..
Just a little addicted..
I'm flying my Platt 190A, Sist 190A, Topflite 190D9, ESM 190A, ESM 190D9, and a Platt 190A, Holman 190D9 and skyshark D9 under the works. Not to mention the four FW190 foamies..
At some point, I'll start my Anderson TA152 and Hopefully the captured P-47 razorback. But I have a funny feeling that someone here (not saying any names) will have me building a Meister 190A for them instead..
Just a little addicted..
Thanks