hanger 9 bf 109 build
03-17-2013, 01:24 PM
#1
Member
Thread Starter
Join Date: May 2008
Location: courtenay,
BC, CANADA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
hanger 9 bf 109 build
OVER VIEW
Product Specifications
Wingspan: 64.0 in (163 cm)
Overall Length: 59.0 in (150 cm)
Wing Area: 678.5 sq in (43.8 sq dm)
Flying Weight: 10.25–11.5 lb (4.7–5.2 kg)
Engine Size: 0.61 2-stroke glow; 1.25 4-stroke glow
Motor Size: Power 60
Radio: 5-channel radio system minimum
Servos: (3) standard, (4) mini servos
CG (center of gravity): 3.25–3.50 in (82.5–88.9mm) behind leading edge at wing center
Wing Loading: 34.7–39.0 oz/sq ft (107–119 g/sq dm)
Spinner Size: 118mm diameter
Speed Control : 80A brushless minimum
Recommended Battery: 22.2V 6S 5000mAh 30C Li-Po
Flaps: Yes
Retracts: Optional
Control Throw (Ailerons): Low: 16mm up, 14mm down, 10% expo; High: 20mm up, 17mm down, 10% expo
Control Throw (Elevator): Low: 15mm up/down, 10% expo; High: 20mm up/down, 10% expo
Control Throw (Rudder): Low: 25mm right/left, 15% expo; High: 30mm right/left, 15% expo
Control Throw (Flaps): Mid: 35mm; Full: 58mm
Scale: 1:6
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 20+Hours
03-17-2013, 01:31 PM
#2
Member
Thread Starter
Join Date: May 2008
Location: courtenay,
BC, CANADA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
FIRST IMPRESSIONS
i opened the box to find every thing in good order, the covering was tight no wrinkles, nothing was broken. The color scheme looks better in person.
i have the e-flite eletracts, and struts to install in the wing. will post pics soon.
i opened the box to find every thing in good order, the covering was tight no wrinkles, nothing was broken. The color scheme looks better in person.
i have the e-flite eletracts, and struts to install in the wing. will post pics soon.
03-17-2013, 05:17 PM
#4
Join Date: Feb 2006
Location: camden, SC
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
03-18-2013, 09:07 AM
#9
Member
Thread Starter
Join Date: May 2008
Location: courtenay,
BC, CANADA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
I have not decided on which engine i will be using, my choices are, OS 120 surpass with pump, satio 125, Asp 120 fs i have all of them laying around, any suggestons?
03-18-2013, 09:07 AM
#10
RE: hanger 9 bf 109 build
ORIGINAL: Asanders
nothing wrong with another build thread.. go for it. Pictures hopefully. thanks!
nothing wrong with another build thread.. go for it. Pictures hopefully. thanks!
Looking forward to your build.
Oriole
03-18-2013, 10:14 AM
#11
Member
Thread Starter
Join Date: May 2008
Location: courtenay,
BC, CANADA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
ORIGINAL: oriole
Agreed! The other thread is more of a hodge podge of comments, and positive/negative critiques.
Looking forward to your build.
Oriole
ORIGINAL: Asanders
nothing wrong with another build thread.. go for it. Pictures hopefully. thanks!
nothing wrong with another build thread.. go for it. Pictures hopefully. thanks!
Looking forward to your build.
Oriole
03-20-2013, 03:31 PM
#15
Member
Thread Starter
Join Date: May 2008
Location: courtenay,
BC, CANADA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
i used super rc z 56 canopy glue to put on the canopy, i like using this stuff because it wipes off with water when you first put it on and it dries clear. i use elastics to keep the canopy from lifting it ensures a good fitment, well it works for me.
03-20-2013, 05:26 PM
#17
Member
Thread Starter
Join Date: May 2008
Location: courtenay,
BC, CANADA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
The 60 - 120 81-Degree BF 109 Strut-Ready Main Electric Retract by E-flite (EFLG509) with the 60 - 120 BF 109 Main Strut Set by E-flite (EFLG510109). They went in pretty easy, i had to cut away a little of the plastic on the inside to get cleareance for the pin the use to keep it together. The blind nuts were pre installed and alligned perfect with the mounts. the hardware that came with the retracts were of good quality allen heads. All and all one of the easiest set a retracts i ever put in, plug and play. I powered them up, they move with authorty no slop or play, little noisy but no more then what a reall plane would be.
03-22-2013, 08:21 PM
#23
My Feedback: (13)
Join Date: Dec 2001
Location: Urbandale,
IA
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
I'm Running a motor,engine, whatever and it's a Saito 125 4 stroke.....I love the smell of nitro early in the morning....................
03-22-2013, 09:22 PM
#24
Member
Thread Starter
Join Date: May 2008
Location: courtenay,
BC, CANADA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
ORIGINAL: Jimmy Bananas
I'm Running a motor,engine, whatever and it's a Saito 125 4 stroke.....I love the smell of nitro early in the morning....................
I'm Running a motor,engine, whatever and it's a Saito 125 4 stroke.....I love the smell of nitro early in the morning....................
03-23-2013, 09:18 AM
#25
Senior Member
My Feedback: (33)
Join Date: Oct 2009
Location: Marble, MN
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
RE: hanger 9 bf 109 build
I am looking at the angle the retracts are from the leading edge. Does the wheel fit parallel in the wing or is it canted slightly?
Ed
I have a 120fs that needs a home.