FW-190 D9 1/5 by fokkerc.com
Hurry up taxes..
02-11-2015, 12:45 PM
#228
Thread Starter
Yes I can put them in the box , it is not problem , tommorow I will finish with the elevator and rudder , then I will wral the balsa ribs and I will be ready. What size you talk about ? 1/4 ?
02-17-2015, 12:38 PM
#236
Thread Starter
Hi guys, I am glad to show you the first looc of A8 1/4 and 1/5 plans 
The plans are based around 95% on the original factory Germany plans of the real machine/ This was my idea, to create model maximum near to the original . So this is it
The plans are based around 95% on the original factory Germany plans of the real machine/ This was my idea, to create model maximum near to the original . So this is it
Last edited by fokke; 02-17-2015 at 01:06 PM.
02-20-2015, 12:09 AM
#246
Thread Starter
02-20-2015, 07:53 AM
#247
My Feedback: (16)
Join Date: May 2011
Location: Elizabeth, NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Rumen,
Love it your progress ,you have a kind eye for details my friend.I wish I had a field big enough for 1/4 scale,but 1/5 will work just fine for me. I've been lazy on building this past week,it's cold here in the Northeast temp outside is only 4F degrees add the wind chill factor it's -20F. Attic heat is poor at best,when it's that cooled...Brrr
Love it your progress ,you have a kind eye for details my friend.I wish I had a field big enough for 1/4 scale,but 1/5 will work just fine for me. I've been lazy on building this past week,it's cold here in the Northeast temp outside is only 4F degrees add the wind chill factor it's -20F. Attic heat is poor at best,when it's that cooled...Brrr
02-21-2015, 07:56 AM
#250
Thread Starter
Yes something from 75cc to 120 cc . Now I saw in my plans that is the diameter of cowl in 1/4 , it is 265mm or 10,43"inches ,probably and moki 150 cc. I need too check in moki site for their dimentions
