FW-190 D9 1/5 by fokkerc.com
#601
Join Date: Dec 2012
Location: charpey, FRANCE
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
have you got a solution for the retracts for your 1/3 anton ? will you provide them ? , the gear for those larges and heavy FW are a problem , on our 1/3 dora project , we made it but it was tricky and don't know at this time if the retracts resists to the flights as i haven't any news from model .....
#602
Thread Starter
I will make the plans and will cut he model , just this ....
The guy from Australia will buy 1/3 gears maybe from Sierra or shinding machine , custum landing gears for sure, becaus onthe markwet do nto have this larg gears
In this case , I will be thankful if you write your coments a boytr the 1/3 construction
I will write for any desition and changes who I think to make on the plans
The first is to make all stringers 5mm and 8 mm in the central section and nose
The guy from Australia will buy 1/3 gears maybe from Sierra or shinding machine , custum landing gears for sure, becaus onthe markwet do nto have this larg gears
In this case , I will be thankful if you write your coments a boytr the 1/3 construction
I will write for any desition and changes who I think to make on the plans
The first is to make all stringers 5mm and 8 mm in the central section and nose
#603
Hi, thank you for the info. I have the same problem... the tail is too thin.
#607
Thread Starter
I think taht is time Darrel to make tail wheel for fokkerc.com kits
I do not want to change the model dimentions, becaise I want to stay in original lines
I do not want to change the model dimentions, becaise I want to stay in original lines
#613
Thread Starter
FW 190 A8 1/3 !
I start work on 1/3 scale version of my desing of Anton
The model will be all wood construction (so far ) just the canopy have to be lexan
Here will post some my changes and desitions on this construction , the model will fly with 400cc MOKI so I have to change some areas around the firewall to correct some elements in the wings , to change some plywood details as balsa and many other stuf. So I will post my work here in my old thread
I start with the wood cowll
I start work on 1/3 scale version of my desing of Anton
The model will be all wood construction (so far ) just the canopy have to be lexan
Here will post some my changes and desitions on this construction , the model will fly with 400cc MOKI so I have to change some areas around the firewall to correct some elements in the wings , to change some plywood details as balsa and many other stuf. So I will post my work here in my old thread
I start with the wood cowll
#615
Thread Starter
https://www.youtube.com/watch?v=TSE8HQ9k3pg&feature=youtu.be
First parts are ready
https://www.youtube.com/watch?v=TSE8...ature=youtu.be
https://www.youtube.com/watch?v=TSE8...ature=youtu.be
Last edited by fokke; 01-06-2017 at 07:54 AM.
#619
Thread Starter
Here is video with elevator and ailerons of FW
https://www.youtube.com/watch?v=LHR4W5Ayn14 https://www.youtube.com/watch?v=RHTdYSWedNM
https://www.youtube.com/watch?v=LHR4W5Ayn14 https://www.youtube.com/watch?v=RHTdYSWedNM