schwalbe 1

have you got a solution for the retracts for your 1/3 anton ? will you provide them ? , the gear for those larges and heavy FW are a problem , on our 1/3 dora project , we made it but it was tricky and don't know at this time if the retracts resists to the flights as i haven't any news from model .....

fokke

I will make the plans and will cut he model , just this ....
The guy from Australia will buy 1/3 gears maybe from Sierra or shinding machine , custum landing gears for sure, becaus onthe markwet do nto have this larg gears


In this case , I will be thankful if you write your coments a boytr the 1/3 construction

I will write for any desition and changes who I think to make on the plans

The first is to make all stringers 5mm and 8 mm in the central section and nose

Cristian2fast4you

Hi, thank you for the info. I have the same problem... the tail is too thin.

Cristian2fast4you

Manage to fit the main left retract today.

fokke

Cristian, what you mean with too thin?

Cristian2fast4you

The control horn of the retract is wider than the tail.

fokke

I think taht is time Darrel to make tail wheel for fokkerc.com kits
I do not want to change the model dimentions, becaise I want to stay in original lines

Cristian2fast4you

Why not? Let's see what he can do!

Cristian2fast4you

Cockpit kit arrived today.

fokke

Cristian2fast4you

Merry Christmas Rumen!

jescardin

My Feedback: (1)

Merry Christmas from Spain!.


Best Regards.

fokke

FW 190 A8 1/3 !

I start work on 1/3 scale version of my desing of Anton
The model will be all wood construction (so far ) just the canopy have to be lexan
Here will post some my changes and desitions on this construction , the model will fly with 400cc MOKI so I have to change some areas around the firewall to correct some elements in the wings , to change some plywood details as balsa and many other stuf. So I will post my work here in my old thread

I start with the wood cowll


​

fokke

fokke

https://www.youtube.com/watch?v=TSE8HQ9k3pg&feature=youtu.be First parts are ready

https://www.youtube.com/watch?v=TSE8...ature=youtu.be

fokke

Hi guys, here is the new 1/3 FW-190 A8 fokkerc.com model Wingspan 350cm - 138" inch
400cc gas engine

Cristian2fast4you

Uaaaau, looks great (and it is)! But 3,5 m? You need a truck.

proteus_X3

My Feedback: (16)

Wow Rumen,she's a Beauty !!!

fokke

Here is video with elevator and ailerons of FW

https://www.youtube.com/watch?v=LHR4W5Ayn14 https://www.youtube.com/watch?v=RHTdYSWedNM

fokke

OK guys , here is 1/3 instrument panel and all rings of FW 190 A8 and D9
fokkerc.com

Brad330l

My Feedback: (1)

OUTSTANDING.
Are you going to anything like this for the 1/5th BF109 kit fokke?

Great work,

Brad

fokke

Thank you very much Brad , I have instrument panel set for BF 109

Brad330l

My Feedback: (1)

Yes sorry mate I meant the gear door covers etc.....

Brad

fokke

Finaly , the plans of 1/3 are done for print

fokke

Hi again huys, here is one of my favorite builders from Austria and his start work on mine FW 190 D9 1/4