acdii

I picked up a Top Flite P-51 pilot and cockpit kit for the 60 arf from Tower hobbies. From what I can tell it will be a perfect match for the Gold kit.

prop wash

Post me also.Looove P51's.
Tom

Quikturn

My Feedback: (12)

OK, I guess I'm #33.

brockettman

Ralph, I see what you mean. After looking closer at the B configuration, he fits in there rather nicely! Thanks! Sounds like you got shorted a pilot figure with your plane

golfandfly

My Feedback: (99)

I Would like to join, I have 3 Topflight GS ARC,DLE 55
Hanger 9 150 ARC, Turnigy 52
World Models GS ARC,PTE 36
I will post Pix. later. Thanks, Steve

lancairmustang

Your welcome sir!

Cub_Boy

My Feedback: (6)

Hi lancairmustang,

Can I join too?

Rick

bdoxey

My Feedback: (6)

Here's mine. TF GS ARC modified a bit. Spychalla cowl (highly recommended!), DLE-55RA, Down and Locked modified Robart gear with inner gear doors, fiberglassed and Warbird Colors finish. 30 flights to date.



Bryan

FalconD

My Feedback: (190)

I'm in, please! TF kit, Q52.

FalconD

My Feedback: (190)

I will claim #34 !

Leroy Gardner

Pictures should be of RC builds not the real thing, don't know how they can qualify.

70 ragtop

My Feedback: (24)

Another Byron in the club, P-51 all time favorite!
Looks like I'm 51

rc74

My Feedback: (6)

My Nosen 1/4 Scale P-51 w/DA85 and My TF P-51 Racer w/DA50

Sonofasailor

My Top Flite Mustang, Hell-er Bust, fiberglass, paint , DA-50 and Sierra retracts.

Lil Hoss

My Feedback: (58)

Good Morning Gentlemen.......
I am thinking of buying this Mustang http://www.rcuniverse.com/market/item.cfm?itemId=957637
The seller tells me it is a older Great Planes 86" ws composite. I t has a few dings but repairable.
Has anyone in the forum had or flown one of these Mustangs??
I could sure use some advice
Thanks Guys

Hoss

John Taylor

My Feedback: (16)

Hi guy's I would like to join. I have a Ziroli P-51 which I converted to a B model and I'm re-covering a Nosen P-51 for a friend. Question on the Nosen Did anyone make retracts for this big bird? John T

FalconD

My Feedback: (190)

Hoss, I don't think Great Planes ever made a big Mustang. I may be wrong, but I don't think so. Looking at the thread, it's hard to tell enough from pic. The ball links low on rudder makes me think its a Byron. If its a glass fuse that also would point to a Byron. Foam wing? Detailed panel lines in fuse? Need better pics to be sure. If its is a Byron, they fly excellent. If it is a built up fuse and wing, it could be many kits in that size.

Lil Hoss

My Feedback: (58)

Thank you GIVdriver......
He says it's a glass wing. The fuse has panel lines. The picture you are seeing is a painted model.
I think I may pass on it.
I really thank you for replying............
Hoss

Instructor

My Feedback: (16)

Hi John,

I have a Nozen P-51 that has retracts in it. I used the Robart #152 retracts. The way the wing is made, I have had nothing but problems with the mounts staying in the wing. The 152 Robart retracts are mounted at the very front of the wing. As you can tell, there isn't much to hold them in. I think Robart makes a large set of retracts like the ones that they make for the Top Flite P-51. Also, I think Sierra makes a large set for the P-51. Good luck......

Larry / Instructor

FalconD

My Feedback: (190)

Leroy. I'll take that as a complement! It is a Top Flight kit. Currently on display at Sac Air Force Museum between Omaha and Lincoln Ne. Aircraft in background are full scale. Look close lower left and you can see the model is setting on a table. Thanks for the complement!!

rc74

My Feedback: (6)

I have Sierra in my Nosen. I first had Robart but they would not hold up to any side force

Steve_S-RCU

Hi John,

I used Robart 635 in my Nosen P-51 for 8 years with no issues.

bdoxey

My Feedback: (6)

Ok, that's impressive. Nice job!

Bryan

Instructor

My Feedback: (16)

Hi rc74,

You are correct is saying they won't hold up under any side force. I have learned to stop the plane before I make any corrections to turn it under any speed. Sure is a lot better than tearing out the mount and rebuilding them......

Larry / Instructor

skillet92

Top Flite 60 sized with dle20, ESM with dle 30 and Currently a H9 150 with a DLE 35. Awesome flyer. Will try and load photos if I can figure the windows 8 out. lol