EME 60 Owners
#1
Thread Starter
EME 60 Owners
Hi,
I'm trying to dial in this EME 60 in the H9 60cc Mustang. The manual suggests a 23x10 for break-in, but I don't have one so I'm using a 22x10 Xoar. With that, I'm only getting 6,250-6,410 rpm on the ground. That seems low to me. Any input?
I'm trying to dial in this EME 60 in the H9 60cc Mustang. The manual suggests a 23x10 for break-in, but I don't have one so I'm using a 22x10 Xoar. With that, I'm only getting 6,250-6,410 rpm on the ground. That seems low to me. Any input?
#2
Hi,
i have this engine in my ESM 50 CC BF 109. i am getting 6.200 rpm during cold weather with 24x8 3 blade fiala prop and custom exhaust. . Using pits muffler exhaust you will see lower max rpms. Of course engine has been broken-in
i have this engine in my ESM 50 CC BF 109. i am getting 6.200 rpm during cold weather with 24x8 3 blade fiala prop and custom exhaust. . Using pits muffler exhaust you will see lower max rpms. Of course engine has been broken-in
#4
in the beggining i used a pitts muffler too on that engine and rpm where about 300-400 lower i think, thats why i returned to custom exhaust ( i like that BIG 3 blade prop!!!), of course i had to do a little cowl cutting thought...
Hope it helps...