Top RC Zero from Gator R/C
#555
My Feedback: (207)
Is what you have alcohol or petrol? I have a couple of the 777's that I have been running for a few years now with great success. I also have a FG90 that runs well. The Seven cylinder just sounds much better than three and at 90cc should be a little throatier.
Any US importers yet?
Any US importers yet?
#557
My Feedback: (8)
Is what you have alcohol or petrol? I have a couple of the 777's that I have been running for a few years now with great success. I also have a FG90 that runs well. The Seven cylinder just sounds much better than three and at 90cc should be a little throatier.
Any US importers yet?
Any US importers yet?
#558
Join Date: Dec 2005
Location: Aarhus, DENMARK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I have successfully maidened my Zero and it flies fantastic. One issue though. One of the TopRC retracts doesn´t have the strenght to retract once in the air. On ground everything seems fine, but do feel that they are a bit week. Not much of a push to make them stop retracting.
Anyone else have this problem?
Anyone else have this problem?
#559
I have successfully maidened my Zero and it flies fantastic. One issue though. One of the TopRC retracts doesn´t have the strenght to retract once in the air. On ground everything seems fine, but do feel that they are a bit week. Not much of a push to make them stop retracting.
Anyone else have this problem?
Anyone else have this problem?
jim
Last edited by jimkron; 08-01-2018 at 05:44 AM.
#560
Join Date: Dec 2005
Location: Aarhus, DENMARK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Hi Jim, OK so you too are having this problem. I also have the TopRc gear set. Its a little irritating to start Up not Knowing og the gear will retract🤔. Have tried to lube and used a lipo with a higher C-count.
#561
My Feedback: (11)
Mitch at Down and Locked can probably fix you up. I have an A10 that wouldn't drag the gear up in the airstream moving forward, his gear work like a champ
https://www.downandlocked.com/
https://www.downandlocked.com/
#563
Join Date: Dec 2005
Location: Aarhus, DENMARK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#564
Join Date: Dec 2005
Location: Aarhus, DENMARK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Mitch at Down and Locked can probably fix you up. I have an A10 that wouldn't drag the gear up in the airstream moving forward, his gear work like a champ
https://www.downandlocked.com/
https://www.downandlocked.com/
#566
Mitch at Down and Locked can probably fix you up. I have an A10 that wouldn't drag the gear up in the airstream moving forward, his gear work like a champ
https://www.downandlocked.com/
https://www.downandlocked.com/
#567
Join Date: Jul 2016
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
#568
Join Date: Dec 2005
Location: Aarhus, DENMARK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
what is more irritating is that we pay more than $400 for the electric retract and it doesn’t work right. And not even one solution from the manufacturer!!! And yet they want us to buy their fw109, their jets, etc. why the heck would I want to buy their products, then turn around and spend some more just to get it to work right. I rather save my money and go with someone else.
#569
Join Date: Jul 2016
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
you are spot on. Hate to say that me and my pal went for the TopRc Fw-190 as well. Mine havent flown yet, but saw Dans maiden. Very nice landing, but yet gear collapsed. Even more crappier than this one. It is now changed to Sierra. Frustrating, and expensive (and stupid) lessons. From now im back to well known/proven brands.
#572
My Feedback: (207)
I have the Zero, two P-51's, FW-190 and Odyssey. The only one I have had issues with, is the FW190 !! BAD !! sizzor links and not Big enough Air rams to retract properly. I had to do a barrel roll on every flight to get them both up. Wheel weight stops the gear every time.
On the others I have had MANY MANY flights with Zero hassle. I use a 7 cell 1600 nimh but have also used a 8cell 2000mah nimh on the older controllers. I dont care for Lipos.
On the others I have had MANY MANY flights with Zero hassle. I use a 7 cell 1600 nimh but have also used a 8cell 2000mah nimh on the older controllers. I dont care for Lipos.
#574
Join Date: Dec 2005
Location: Aarhus, DENMARK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#575
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
The gentleman's name is Toshiaki Nakayama if you want to look him up on FB. I too have a Top RC Zero waiting on the shelf that will be getting a complete and total renovation similar to what Mr. Nakayama is doing. Got to get a couple other projects done first but can't wait to get working on it when circumstances allow.