New 80" WS SBD-5 Dauntless AFT
#1
Thread Starter
My Feedback: (34)
New 80" WS SBD-5 Dauntless AFT
Just came across this one....
https://www.jb-hobbies.com/presta/wa...cc-eg-arf.html
It is going to be displayed at the AMA Convention this weekend.....I will look it over carefully....very carefully....while one hand will be on my wallet
Jerry
https://www.jb-hobbies.com/presta/wa...cc-eg-arf.html
It is going to be displayed at the AMA Convention this weekend.....I will look it over carefully....very carefully....while one hand will be on my wallet
Jerry
#3
My Feedback: (8)
Have One ... Its AWESOME. one of the BESTs ARF out there, few issues but overall its a 8.5 to 9 , hope to have it finished by the end of the week. BTW JB Hobbies is a NO Smoke , No Mirrors dealer , Just Delivers the GOODs on time , I would BUY from JB Hobbies again.
Semper Fi
Joe
Semper Fi
Joe
#5
My Feedback: (8)
No Jerry, SVF has a low key Warbird event that weekend.
LDM yes the wood quality leaves something to be desired, although lazer cutting is outstanding .
All interior surfaces appear to have CA joints No lose joints visable . The interiors of fuselage/flaps is more like a "white wash"rather than a paint .some area's require prior experience in kit building, but Overall Its a KEEPER..
Semper Fi
Joe
LDM yes the wood quality leaves something to be desired, although lazer cutting is outstanding .
All interior surfaces appear to have CA joints No lose joints visable . The interiors of fuselage/flaps is more like a "white wash"rather than a paint .some area's require prior experience in kit building, but Overall Its a KEEPER..
Semper Fi
Joe
Last edited by uncljoe; 01-05-2016 at 03:04 PM.
#7
My Feedback: (8)
Few progress photo's, I want a open canopy so,clip clip .little glue here and screws etc. checking out the cabling ,etc, Might even try and make a operating hook...
Semper Fi
Joe
Had a issue with the wood(simulated plywood) for the servo mounts. reenforced wing mts.
,Pined all HINGES & control arms,
Used the space under the motor for the controller .
Semper Fi
Joe
Had a issue with the wood(simulated plywood) for the servo mounts. reenforced wing mts.
,Pined all HINGES & control arms,
Used the space under the motor for the controller .
#10
My Feedback: (48)
Have One ... Its AWESOME. one of the BESTs ARF out there, few issues but overall its a 8.5 to 9 , hope to have it finished by the end of the week. BTW JB Hobbies is a NO Smoke , No Mirrors dealer , Just Delivers the GOODs on time , I would BUY from JB Hobbies again.
Semper Fi
Joe
Semper Fi
Joe
#17
My Feedback: (8)
Jerry
Yes I did get the factory retracts, They wrong scale wise as the strut should be on the inside with wheel on the outside . These work, but again NOT scale But for my standoff scale there DEAD NUTS on....
LDM the more I handle the structure,it requires some care as a few GLUE(ca) joints have opened .
As far as motor spacers 2" will not work .Need to be at 2.375 " at least to clear cowl .
Other than a few MINOR Issues , IMO its a Better than average ARF But the ACID test is how well it flys . Hopefully the batteries and receive arrive SOON.
Semper Fi
Yes I did get the factory retracts, They wrong scale wise as the strut should be on the inside with wheel on the outside . These work, but again NOT scale But for my standoff scale there DEAD NUTS on....
LDM the more I handle the structure,it requires some care as a few GLUE(ca) joints have opened .
As far as motor spacers 2" will not work .Need to be at 2.375 " at least to clear cowl .
Other than a few MINOR Issues , IMO its a Better than average ARF But the ACID test is how well it flys . Hopefully the batteries and receive arrive SOON.
Semper Fi
#20
My Feedback: (8)
Tailskid .. It's not as easy as swapping the struts, the retract motor (or Piston) is on the lower,than the strut, My Zirolli had Robart struts which are constructed just like the full scale,
Also for those who want the scale look the canopy is short of cross bracing between all top of all canopy glass . I just added a piece of tape where they would go.
Semper Fi
STILL waiting on batteries.....
Also for those who want the scale look the canopy is short of cross bracing between all top of all canopy glass . I just added a piece of tape where they would go.
Semper Fi
STILL waiting on batteries.....