Help....
#1
Thread Starter
Help....
Anybody got an 11ch receiver by JR they're not using and would be willing to sell it? JR has discontinued the 11 ch receiver and replaced with an 8ch. Has to be the DMSS version. I have the 11GX transmitter and a new TF P47 giant scale warbird that needs it badly.....
Thanks Captain Ron,
Thanks Captain Ron,
#6
Captainron.....Lemon-rx has a 10 channel receiver that is JR dsmx. It's also backwards compatible with DSM2. I have two of them.
They run the satellite rx's same as a JR spektrum. You can have 2 satellites same as JR.
https://www.lemon-rx.com/index.php?route=product/product&path=72&product_id=108
They run the satellite rx's same as a JR spektrum. You can have 2 satellites same as JR.
https://www.lemon-rx.com/index.php?route=product/product&path=72&product_id=108
#7
Thread Starter
Thanks Katniss, The XG11 JR transmitter DMSS will only talk to receivers that are DMSS. It will not bind to any rx except the JR DMSS receivers. Thanks for your help.
#8
OK.. ..So another option....
You can use a dmss jr rg812bpx 8 even with an rg812bpx odd to get channel extensions up to 16 channels.
http://www.jramericas.com/236276/JRPR03461EVEN/?pcat=474
I have a JR 11x dsmx/dsm2 transmitter. I guess I'm fortunate to have bought it when I did.
You can use a dmss jr rg812bpx 8 even with an rg812bpx odd to get channel extensions up to 16 channels.
http://www.jramericas.com/236276/JRPR03461EVEN/?pcat=474
I have a JR 11x dsmx/dsm2 transmitter. I guess I'm fortunate to have bought it when I did.
#9
Thread Starter
Katniss,
That seems like my only option at this time. I'm thinking of doing the 6ch -A and the 6 ch -B for a full 12 channels and using 11 of them. I have an older XG11 that does not have the XBUS software on it. SO! I'll have to send it back to JR and have them update the software to include the Xbus............. Thanks again for your input and taking the time to respond.
Captain Ron,
That seems like my only option at this time. I'm thinking of doing the 6ch -A and the 6 ch -B for a full 12 channels and using 11 of them. I have an older XG11 that does not have the XBUS software on it. SO! I'll have to send it back to JR and have them update the software to include the Xbus............. Thanks again for your input and taking the time to respond.
Captain Ron,
#11
Thread Starter
#15
Thread Starter