TF GS P47 Build - yeah another bloody one!!
My Feedback: (1)
Check your PM's I will send you some more info re Bundy.
My Feedback: (1)
My Feedback: (57)
Very nice stuff!
My Feedback: (1)
Banned
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: Brisbane, Queensland, AUSTRALIA
Posts: 7,744
Likes: 0
Received 2 Likes
on
2 Posts
glad somebody gets a laugh Bob, I post dribble on FB and all it does is fire up the lefties and the goat shagging crowd. funny about that though hehe
Went through my pile of bits of printed out paper and photos etc looking for the insignia and invasion stripes layout. Have now found all of that.
I was thinking of using the decals that came with the kit but they are very creased and peeling in some places so will just them as guides to take measurements off. I'll tape up and spray. I did that on my P51 wing when I detailed it about 10 years back.
Reminds me I need to adjust the retract air valve on the P51 as they are operating too fast at present. Sat morning job I think.
Went through my pile of bits of printed out paper and photos etc looking for the insignia and invasion stripes layout. Have now found all of that.
I was thinking of using the decals that came with the kit but they are very creased and peeling in some places so will just them as guides to take measurements off. I'll tape up and spray. I did that on my P51 wing when I detailed it about 10 years back.
Reminds me I need to adjust the retract air valve on the P51 as they are operating too fast at present. Sat morning job I think.
Banned
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: Brisbane, Queensland, AUSTRALIA
Posts: 7,744
Likes: 0
Received 2 Likes
on
2 Posts
If those pylons at scale specilaities are made from the old aerotech ones then they will fit very nicely. That is what I am using on mine.
I used one of there chin dividers as well but it is a bit too narrow in width side to side but can be adaptoed. I see they now have one to suit the TF version.
I used one of there chin dividers as well but it is a bit too narrow in width side to side but can be adaptoed. I see they now have one to suit the TF version.
My Feedback: (1)
Hi Pete,
My MAAA Heavy Model Inspector approval arrived in the mail today so if you can't get your Stang done before Bundy I can do it for you there.
Although I might fail it because it's not a Thunderbolt!!!!!
Cheers
My MAAA Heavy Model Inspector approval arrived in the mail today so if you can't get your Stang done before Bundy I can do it for you there.
Although I might fail it because it's not a Thunderbolt!!!!!
Cheers
My Feedback: (2)
Join Date: Jul 2003
Location: Brisbane, QLD, AUSTRALIA
Posts: 2,787
Likes: 0
Received 8 Likes
on
4 Posts
Pete, I can cut spray masks for your bars and stars on my vinyl cutter if you need them.... and yes,,, it will cost you the earth!!
Thanks
Dave
P.S. with any luck off to visit Ron tomorrow as my prezzies have arrived!!! hopefully he's wearing something red and it will be like Christmas in July, but early.
My Feedback: (1)
My Feedback: (2)
Join Date: Jul 2003
Location: Brisbane, QLD, AUSTRALIA
Posts: 2,787
Likes: 0
Received 8 Likes
on
4 Posts
No Bite??? not even a little nibble?
Hey Mick,
He items them selves are not all that exciting other than JR's new airspeed sensor which I can't wait to try out, But they are just the last few items i needed to buy for my current build/assemble.
Thanks
dave
Hey Mick,
He items them selves are not all that exciting other than JR's new airspeed sensor which I can't wait to try out, But they are just the last few items i needed to buy for my current build/assemble.
Thanks
dave
Banned
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: Brisbane, Queensland, AUSTRALIA
Posts: 7,744
Likes: 0
Received 2 Likes
on
2 Posts
yeah yeah Dave I hear ya!! I'll make sure they are on tight. Was funny that time!
Heading to Gratton field sunday and also hoping to fly the Vampire. Hopefully the smoke does not escape this time! Mick if for some reason I don't get it done will take you up on that offer. Well I do own a P47 so that must count and it has paint on it now including camo.
Hawk looks nice though not sure about Royal camel goat sh @#$%^ airlines scheme, was going to say something else but fun police will nab me. I got banned on FB the other day for ripping into that crowd and all the lefty loons who support them but oh so worth it
Sounds like a plan on the stars & bars spray masks. I have the original decals so can use them for sizing. Do you want me to post those to you? I'm sure we can come to a good price hahaha
cheers
me
Heading to Gratton field sunday and also hoping to fly the Vampire. Hopefully the smoke does not escape this time! Mick if for some reason I don't get it done will take you up on that offer. Well I do own a P47 so that must count and it has paint on it now including camo.
Hawk looks nice though not sure about Royal camel goat sh @#$%^ airlines scheme, was going to say something else but fun police will nab me. I got banned on FB the other day for ripping into that crowd and all the lefty loons who support them but oh so worth it
Sounds like a plan on the stars & bars spray masks. I have the original decals so can use them for sizing. Do you want me to post those to you? I'm sure we can come to a good price hahaha
cheers
me
My Feedback: (2)
Join Date: Jul 2003
Location: Brisbane, QLD, AUSTRALIA
Posts: 2,787
Likes: 0
Received 8 Likes
on
4 Posts
yeah yeah Dave I hear ya!! I'll make sure they are on tight. Was funny that time!
Heading to Gratton field sunday and also hoping to fly the Vampire. Hopefully the smoke does not escape this time! Mick if for some reason I don't get it done will take you up on that offer. Well I do own a P47 so that must count and it has paint on it now including camo.
Hawk looks nice though not sure about Royal camel goat sh @#$%^ airlines scheme, was going to say something else but fun police will nab me. I got banned on FB the other day for ripping into that crowd and all the lefty loons who support them but oh so worth it
Sounds like a plan on the stars & bars spray masks. I have the original decals so can use them for sizing. Do you want me to post those to you? I'm sure we can come to a good price hahaha
cheers
me
Heading to Gratton field sunday and also hoping to fly the Vampire. Hopefully the smoke does not escape this time! Mick if for some reason I don't get it done will take you up on that offer. Well I do own a P47 so that must count and it has paint on it now including camo.
Hawk looks nice though not sure about Royal camel goat sh @#$%^ airlines scheme, was going to say something else but fun police will nab me. I got banned on FB the other day for ripping into that crowd and all the lefty loons who support them but oh so worth it
Sounds like a plan on the stars & bars spray masks. I have the original decals so can use them for sizing. Do you want me to post those to you? I'm sure we can come to a good price hahaha
cheers
me
Hope that ESC does the trick for you. It should be a real nice flyer once you get it all sorted out.
Yeah I didn't pick the colour scheme on the Hawk, bought her second hand and they are rare as to come across so had to go with what was available. It will more than likely get a repaint in a few seasons time to something more home like.
Re: bars and stars. I should be able to have them drawn up without the originals. Then what we can do is come over one day with them in your hand and I can do the final sizing then and there before I cut them out. Only takes a jiffer once the artwork is finished.
The cowl looks great!!!
Thanks
Dave
Banned
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: Brisbane, Queensland, AUSTRALIA
Posts: 7,744
Likes: 0
Received 2 Likes
on
2 Posts
yeah was amusing watching the pair of you lope off in a most ungraceful manner. I have some photos of it I think.
ok will let you know about spray masks, probably easier to just post you the decals then you can do them in one go.
Mustang got recertified today, bad cross wind but got away with it. Take offs were lovely, landings were rubbish but I got a pass, only just.
Flew the socks off the FMS corsair and pranged the Vampire as the CG was badly out, dunno how I stuffed that up but I did, it was like a sock in washing machine. Got it down in one pice but ripped one main gear out and damaged the nose gear. All fixable. mutter mutter.
About 10 flights all up mainly on corsair.
We were all still out there at 3.30!
cheers
me
ok will let you know about spray masks, probably easier to just post you the decals then you can do them in one go.
Mustang got recertified today, bad cross wind but got away with it. Take offs were lovely, landings were rubbish but I got a pass, only just.
Flew the socks off the FMS corsair and pranged the Vampire as the CG was badly out, dunno how I stuffed that up but I did, it was like a sock in washing machine. Got it down in one pice but ripped one main gear out and damaged the nose gear. All fixable. mutter mutter.
About 10 flights all up mainly on corsair.
We were all still out there at 3.30!
cheers
me
My Feedback: (1)
Hi Pete,
Got your text re the Stang, good stuff.
I've had a busy last week helping organise The Old Station Fly In & Airshow. Despite heaps of hassles from CASA it turned out to be a great event. About 130 aircraft flew in & for the airshow we had Matt Hall & Paul Bennett doing aeros and 3 x Trojans, an Avenger, Yak 52, Birddog, T-34 Mentor & DH Dove.
hope to maiden the Robart Jug this Thursday.
Mick
Got your text re the Stang, good stuff.
I've had a busy last week helping organise The Old Station Fly In & Airshow. Despite heaps of hassles from CASA it turned out to be a great event. About 130 aircraft flew in & for the airshow we had Matt Hall & Paul Bennett doing aeros and 3 x Trojans, an Avenger, Yak 52, Birddog, T-34 Mentor & DH Dove.
hope to maiden the Robart Jug this Thursday.
Mick
Join Date: Jan 2008
Location: darwin, AUSTRALIA
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mick
good luck with the maiden this week, "hope all goes well" .. I like your colour scheme you have put the jug into.
i will get around to pulling my Robart 47 out of store and putting it together one day,, but too much other stuff on the go at the moment..
good luck with the maiden this week, "hope all goes well" .. I like your colour scheme you have put the jug into.
i will get around to pulling my Robart 47 out of store and putting it together one day,, but too much other stuff on the go at the moment..
My Feedback: (44)
Was listening to AC/DC too much .. presently looking a a possible SkyShark FW-190 D-9 build or an Me-109,as they are advertising again in the latest Model Aviation issue-. I have been flying the Flyzone Aircore WWII fighters out of the lot in front where I live,they are lots of fun and imagine that me flying small electrics,they are good for keeping me honest as in stick and rudder. Take good care my friend
Last edited by ramcfarland; 05-26-2015 at 08:28 AM. Reason: errors
Banned
Thread Starter
My Feedback: (1)
Join Date: Jun 2002
Location: Brisbane, Queensland, AUSTRALIA
Posts: 7,744
Likes: 0
Received 2 Likes
on
2 Posts
Hi Pete,
Got your text re the Stang, good stuff.
I've had a busy last week helping organise The Old Station Fly In & Airshow. Despite heaps of hassles from CASA it turned out to be a great event. About 130 aircraft flew in & for the airshow we had Matt Hall & Paul Bennett doing aeros and 3 x Trojans, an Avenger, Yak 52, Birddog, T-34 Mentor & DH Dove.
hope to maiden the Robart Jug this Thursday.
Mick
Got your text re the Stang, good stuff.
I've had a busy last week helping organise The Old Station Fly In & Airshow. Despite heaps of hassles from CASA it turned out to be a great event. About 130 aircraft flew in & for the airshow we had Matt Hall & Paul Bennett doing aeros and 3 x Trojans, an Avenger, Yak 52, Birddog, T-34 Mentor & DH Dove.
hope to maiden the Robart Jug this Thursday.
Mick
that sounds like it was fun mate. Hope that maiden goes well.
when is Bundy again?
My Feedback: (1)
Bundy Warbirds June 6,7 &8. So not this weekend but the one after.
Talking to Patsy it sounds like they are expecting a good roll up.
I will report back on the Robart Jug maiden. If that goes well I will have it at Bundy too.
Mick
Talking to Patsy it sounds like they are expecting a good roll up.
I will report back on the Robart Jug maiden. If that goes well I will have it at Bundy too.
Mick