ctflyboy

My Feedback: (3)

Nenne,
Your membership in the CORSAIR Brotherhood will never expire,once you join you have a lifetime membership & number
So Nenne # 37 WELCOME BACK,

George
CORSAIR Brotherhood # 1

c550

My Feedback: (16)

Here is a picture of mine. A few little things left to do but it is almost ready for its first flight.

Fly2XS

My Feedback: (65)

Great looking aircraft!
Is that a radial?
What wheels are you using? I like the hub details.
It looks like you found the H9 drop tanks.

c550

My Feedback: (16)

I am using the Saito 450. Those are the Top Flite ARF wheels-$14 a pair and they are light.

BobH

My Feedback: (2)

The Saito 450 fits in the cowl ok?.. I was thinking of the Saito 84 (gas version of the same engine).

c550

My Feedback: (16)

its tight, but the fiberglass specialties F4U4 cowl fits-So I went with the F4U4

prop wash

I just finished mine and waiting for good weather.Got a DLA 58cc and Robart air.All works great so I'll let you know when I fly her.Tom

stevegauth30

Good luck. Looks great.

rt3232

My Feedback: (6)

Hi guys both of your birds look great and good luck with the maidens.

Hope to get mine out this season.

Cheers Bob T
AMA13377 Corsair Brotherhood # 6

prop wash

Thanks Bob.This is my first gasser so I'm looking forward to see if it will do the job.Tom

ctflyboy

My Feedback: (3)

Hi Guys,
I could use a little help her my setup for my landing gear doors are a little difficult to close manually,so I was thinking on making something different,but am uncertain as what I should do.
So if anyone has any pics on what they've done,and can post pictures it would be most helpful.
Thanks in advance,
George
CORSAIR Brotherhood # 1

SWORDSN

My Feedback: (13)

I used this on the ARF.It should work on your kit as well.The gear does it all without a servo or sequencer.

rt3232

My Feedback: (6)

Hi George

way back when I did mine,I made my own springs to hold them open double coil kind of like a cloths pin hinge .032 piano wire as I remember and they have worked great my mistake was I did not get the out line right hear are the pic's

Can't seam to post the pic's so will try to pm them to you

Cheers Bob T
AMA13377 corsair brotherhood #6

prop wash

Semper Fi sword.Do your doors close all the way and do you gears lock. Tom [old jarhead].

stevegauth30

Once a marine, always a marine. At least that's what they taught me!

prop wash

Semper Fi Steve,they taught you well.Tom

Duplicator41

My Feedback: (1)

Go here to see a door set up for the F4U.



http://www.rcscalebuilder.com/forum/...et=last#469053


Cheers,

rt3232

My Feedback: (6)

well George This new computer thingy of mine wont let me send pic in a pm but they are posted way back in the tread
I am trying to get a friend of mine who is an IT to give me a hand

Cheers Bob T

stevegauth30

I've also never been able to figure out how to send pics in a PM. Your not alone buddy.

rt3232

My Feedback: (6)

Steve have not had a problem untill I started using google crome as my broser/server due to hacking problem on outlet but have been told they M/S will have the patch ready to down load about the 23 of may

stevegauth30

That's good to know. I'll keep my eye out for it.

SWORDSN

My Feedback: (13)

Yes they do lock. and yes there are no ex-Marines

George I sent a PM did you receive?

stevegauth30

I knew what ya meant by the way by old" jarhead"

ctflyboy

My Feedback: (3)

Swordsn
Yes I did receive the PM and Thanks for that

George
CORSAIR Brotherhood # 1

ctflyboy

My Feedback: (3)

All
I KNOW THIS IS OFF THE BEATEN PATH AND I APOLOGIZE BUT,I'M NOT SURE WHO ELSE TO ASK
Has anyone heard of a problem with internet explorer where its been hacked and the hackers can overtake your computer I heard this on the news in the first part of the week and haven't heard anything since
George
CORSAIR Brotherhood # 1