GROUP BUILD - Top Flite Giant Scale F4U Corsair
#9176
My Feedback: (6)
Hay George
Yes it is true my flying buddy that is an IT got his info from M/S as he got his schooling thru them, and they will have the patch fixed by 5-23 if all goes as planed. That is why I switched to google crome and I hate it it is a paine in the A@#ss to use it is like going to a nother world for this old man
Hope the helps
Cheers Bob T
P S IT is a free down load
Yes it is true my flying buddy that is an IT got his info from M/S as he got his schooling thru them, and they will have the patch fixed by 5-23 if all goes as planed. That is why I switched to google crome and I hate it it is a paine in the A@#ss to use it is like going to a nother world for this old man
Hope the helps
Cheers Bob T
P S IT is a free down load
#9177
My Feedback: (13)
All
I KNOW THIS IS OFF THE BEATEN PATH AND I APOLOGIZE BUT,I'M NOT SURE WHO ELSE TO ASK
Has anyone heard of a problem with internet explorer where its been hacked and the hackers can overtake your computer I heard this on the news in the first part of the week and haven't heard anything since
George
CORSAIR Brotherhood # 1
I KNOW THIS IS OFF THE BEATEN PATH AND I APOLOGIZE BUT,I'M NOT SURE WHO ELSE TO ASK
Has anyone heard of a problem with internet explorer where its been hacked and the hackers can overtake your computer I heard this on the news in the first part of the week and haven't heard anything since
George
CORSAIR Brotherhood # 1
#9179
My Feedback: (6)
Ok Guys
All my buddy has said is there are a lot of rummers out there, ad as far as he knows adobe and flash player are still ok. but as we all know if there is a will there is a way. he says run your security system every day. I am using WEBROOT and so far it has cept my system clean.
Know back to the important stuff, If the wind will let up I am ready to go flying
Cheers Bob T
AMA13377 Corsair Brotherhood # 6
All my buddy has said is there are a lot of rummers out there, ad as far as he knows adobe and flash player are still ok. but as we all know if there is a will there is a way. he says run your security system every day. I am using WEBROOT and so far it has cept my system clean.
Know back to the important stuff, If the wind will let up I am ready to go flying
Cheers Bob T
AMA13377 Corsair Brotherhood # 6
#9181
Here ya go.
[TABLE="width: 700, align: center"]
[TR]
[TD]
National Cyber Awareness System:
Microsoft Internet Explorer Use-After-Free Vulnerability Being Actively Exploited
04/28/2014 06:19 AM EDT
Original release date: April 28, 2014
US-CERT is aware of active exploitation of a use-after-free vulnerability in Microsoft Internet Explorer. This vulnerability affects IE versions 6 through 11 and could lead to the complete compromise of an affected system.
US-CERT recommends that users and administrators enable Microsoft EMET where possible and consider employing an alternative web browser until an official update is available.
For more details, please see VU#222929.
[TR]
[TD]OTHER RESOURCES:
[/TD]
[/TR]
[TR]
[TD]Contact Us | Security Publications | Alerts and Tips | Related Resources
[/TD]
[/TR]
[/TABLE]
[TABLE="width: 150"]
[TR]
[TD="colspan: 7"]STAY CONNECTED:
[/TD]
[/TR]
[TR]
[TD]
[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]
SUBSCRIBER SERVICES:
Manage Preferences | Unsubscribe | Help
[TR]
[TD]This email was sent to using GovDelivery, on behalf of: United States Computer Emergency Readiness Team (US-CERT) · 245 Murray Lane SW Bldg 410 · Washington, DC 20598 · (703) 235-5110
[/TD]
[TD]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[TABLE="width: 700, align: center"]
[TR]
[TD]
US-CERT is aware of active exploitation of a use-after-free vulnerability in Microsoft Internet Explorer. This vulnerability affects IE versions 6 through 11 and could lead to the complete compromise of an affected system.
US-CERT recommends that users and administrators enable Microsoft EMET where possible and consider employing an alternative web browser until an official update is available.
For more details, please see VU#222929.
[TR]
[TD]OTHER RESOURCES:
[/TD]
[/TR]
[TR]
[TD]Contact Us | Security Publications | Alerts and Tips | Related Resources
[/TD]
[/TR]
[/TABLE]
[TABLE="width: 150"]
[TR]
[TD="colspan: 7"]STAY CONNECTED:
[/TD]
[/TR]
[TR]
[TD]
[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]
SUBSCRIBER SERVICES:
Manage Preferences | Unsubscribe | Help
[TR]
[TD]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[TR]
[TD]
National Cyber Awareness System:
Microsoft Internet Explorer Use-After-Free Vulnerability Being Actively Exploited
04/28/2014 06:19 AM EDT
Original release date: April 28, 2014
US-CERT is aware of active exploitation of a use-after-free vulnerability in Microsoft Internet Explorer. This vulnerability affects IE versions 6 through 11 and could lead to the complete compromise of an affected system.
US-CERT recommends that users and administrators enable Microsoft EMET where possible and consider employing an alternative web browser until an official update is available.
For more details, please see VU#222929.
[HR][/HR]
This product is provided subject to this Notification and this Privacy & Use policy.[HR][/HR]
[TABLE="width: 400"][TR]
[TD]OTHER RESOURCES:
[/TD]
[/TR]
[TR]
[TD]Contact Us | Security Publications | Alerts and Tips | Related Resources
[/TD]
[/TR]
[/TABLE]
[TABLE="width: 150"]
[TR]
[TD="colspan: 7"]STAY CONNECTED:
[/TD]
[/TR]
[TR]
[TD]
[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]
SUBSCRIBER SERVICES:
Manage Preferences | Unsubscribe | Help
[HR][/HR]
[TABLE="width: 100"][TR]
[TD]This email was sent to using GovDelivery, on behalf of: United States Computer Emergency Readiness Team (US-CERT) · 245 Murray Lane SW Bldg 410 · Washington, DC 20598 · (703) 235-5110
[/TD]
[TD]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[TABLE="width: 700, align: center"]
[TR]
[TD]
US-CERT is aware of active exploitation of a use-after-free vulnerability in Microsoft Internet Explorer. This vulnerability affects IE versions 6 through 11 and could lead to the complete compromise of an affected system.
US-CERT recommends that users and administrators enable Microsoft EMET where possible and consider employing an alternative web browser until an official update is available.
For more details, please see VU#222929.
[HR][/HR]
This product is provided subject to this Notification and this Privacy & Use policy.[HR][/HR]
[TABLE="width: 400"][TR]
[TD]OTHER RESOURCES:
[/TD]
[/TR]
[TR]
[TD]Contact Us | Security Publications | Alerts and Tips | Related Resources
[/TD]
[/TR]
[/TABLE]
[TABLE="width: 150"]
[TR]
[TD="colspan: 7"]STAY CONNECTED:
[/TD]
[/TR]
[TR]
[TD]
[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]
SUBSCRIBER SERVICES:
Manage Preferences | Unsubscribe | Help
[HR][/HR]
[TABLE="width: 100"][TR]
[TD]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
#9185
My Feedback: (6)
well the weather hear is S@#$ty at best wind and rain, So have not been able to get out and clear the cob webs out of my engines, and now the weather guys are saying another week maybe
Cheers bobT
PS I do have a sparky thingy called a HOG little investment so I have been trying to get my thumbs working with that
Cheers bobT
PS I do have a sparky thingy called a HOG little investment so I have been trying to get my thumbs working with that
#9186
I did my Maiden fllght today with my TFGS Corsair and I had a great flight ,,,landing sucked.I landed about 5 feet short and tore up the gear bed logs and lost my canopy somewhere???All is easy fix so now I will do that and fly her again.Flies great,just my dumb thumbs.Second time in 46 years that I have done that.Other than that I am very pleased with plane.The "Dla 58 cc seems to have plenty of power.[just the 1st gal]So I'm still in the trial phaze.Happy though.Tom
#9187
My Feedback: (6)
Good Job kinda Well with the weather what it is I have managed to try to fly my old dragon lady to get the thumbs working take off roll was nice till I started to add some up, tail came up to high wheel hub collapsed, pulled the power off bird did a cart wheel. no real damage just my pride and then found I was trying to fly the wrong plain on the x-mitter, so now new wheels are installed and will try to get out next week again and may also take out the corsair.
Cheers bob T
Cheers bob T
#9189
And that is what I like about my 2.4 radios, Very hard if not impossible to fly the wrong plane. My only problem now is, I have three 2.4 radios and I have to remember which plane is programmed to which radio. DOH.
#9190
My Feedback: (3)
Join Date: Jul 2002
Location: Willimantic, CT
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
With all of the guys that have come and gone in this thread building this kit,I cannot believe that no one has had any problems with the GEAR DOORS with the exception of 1 and that was an ARF and he posted pictures,but what about the rest of you guys are these GEAR DOORS TOP SECRET INFORMATION I THOUGHT THIS THREAD WAS ABOUT SHARING THE INFORMATION AS WELL AS POSTING PICTURES.
I'm not ashamed to admit it I am having one hell of a problem with these doors trying to get them to close all the way. I'm ready to close the chapter on these doors and Fly with out them.
George
CORSAIR Brotherhood # 1
I'm not ashamed to admit it I am having one hell of a problem with these doors trying to get them to close all the way. I'm ready to close the chapter on these doors and Fly with out them.
George
CORSAIR Brotherhood # 1
#9191
I will work on the doors once the plane has flown a bit. No sense putting all that time and effort into them if the plane doesnt fly well and becomes a kit again. Then again mine isn't giant scale, so forget what i said.
#9192
My Feedback: (16)
I can try to take some pictures and post them. Here is what I did. I started trying to use some of the levers and other nifty means of moving the gear doors that I have seen. None of them worked for me. So I used 4 micro servos, one for each door. It took a little while tinkering with the linkage geometry to get it sorted out. Also a fairly complex radio mix to get the up and down timing(there are sequencers available), but it does work. I have had some problems on other models with gear door levers jamming the gear in the up position, so I was reluctant to pursue that route. I like the simplicity of individual servos, but I think you could do ok with air cylinders also.
Regards,
Dave
Regards,
Dave
#9193
Well I got the gear bed logs in and glassed so now I have to wait for the weather to clear.Got my pilot in[maybe that is why I landed short]LOL.I did like the way she flew,hope I have better thumbs this time.Tom p.s.I also got the 4 bladed prop[20-10] but will not try it till I get some flite time on the plane.
#9194
My Feedback: (6)
Hay George
I have not been checking the thread, so was unaware you are having problems I don't remember what method you are using so post some pic's if it is mechanical maybe we can give you some ideas, as you know mine are spring loaded open and the side of the wheel closes them. as I remember I used .030 music wire and wound my own springs and I still have not figured out how to post pic's with this new RCU system
Any one help
Cheers bob T
I have not been checking the thread, so was unaware you are having problems I don't remember what method you are using so post some pic's if it is mechanical maybe we can give you some ideas, as you know mine are spring loaded open and the side of the wheel closes them. as I remember I used .030 music wire and wound my own springs and I still have not figured out how to post pic's with this new RCU system
Any one help
Cheers bob T
#9195
I can help you post pics. Just write out your message like you normally would, but instead of clicking " post reply" , click on advanced options. Scroll down to manage attachments, and click on it. Next, you'll see up in the right where it says add files, click that and then click choose files. From there you can either choose an existing file or take photo. After you choose a picture, just click upload and then either done, or add another. Don't try to drag files into the box, it's confusing. Do like I just described and it should work. If not , let me know and I'll try again to better explain.
George, I've come up with a couple of ways that I think will work good. One way is the way I believe RT is describing. Well get you there.
George, I've come up with a couple of ways that I think will work good. One way is the way I believe RT is describing. Well get you there.
#9196
My Feedback: (6)
Steve
Thanks for the info.
George go to post 203 from my notes I think there 4 pic's of my system and to get the doors to close you have to make sure the wheel is below the lower surface, and the arm from the lever to the door was a time consuming thing to get them just right
Cheers guys Bob T
Will give posting pic's tomarow
Thanks for the info.
George go to post 203 from my notes I think there 4 pic's of my system and to get the doors to close you have to make sure the wheel is below the lower surface, and the arm from the lever to the door was a time consuming thing to get them just right
Cheers guys Bob T
Will give posting pic's tomarow
#9197
Hi guys, anyone have any pics of the fuel tank installation? What size tank should I use with a DLE 55 or G62 to get 10 min flights?
Thanks
Thanks
Last edited by drube; 06-05-2014 at 05:09 AM.
#9200
My Feedback: (6)
Hi prop wash
Sounds like you are mastering your bird, One word of caution Corsairs were not designed for 3 pointers, but with out seeing you land I would not thy to tell what to do, on my bird once I start the flare I have to add 1 click of powerto set it on the mains, and once they are down I pull the power back to idle to full stop. Just my way.
Cheers Bob T
Sounds like you are mastering your bird, One word of caution Corsairs were not designed for 3 pointers, but with out seeing you land I would not thy to tell what to do, on my bird once I start the flare I have to add 1 click of powerto set it on the mains, and once they are down I pull the power back to idle to full stop. Just my way.
Cheers Bob T