GROUP BUILD - Top Flite Giant Scale F4U Corsair
My Feedback: (12)
Join Date: Dec 2001
Location: INDIANAPOLIS,
IN
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I can't help with those items - just the Century Jet retracts. Have you tried Cowling & Accessories for Kits looks like they will have the cowling.and dummy engine.
Hi Again .......
I am also trying to get the Mod made by Chad Veich , which he was very kind to send me . I believe that he also sent me the CAD for a kit cutter .
This kit makes the tail lighter and air foil tail surfaces
If Anyone has a dummy 9 CYL engine , that is still in good use, to fit in the cowl , I,m interested
BTW .......... I,ll order the cowl from that address
I am also trying to get the Mod made by Chad Veich , which he was very kind to send me . I believe that he also sent me the CAD for a kit cutter .
This kit makes the tail lighter and air foil tail surfaces
If Anyone has a dummy 9 CYL engine , that is still in good use, to fit in the cowl , I,m interested
BTW .......... I,ll order the cowl from that address
Join Date: Feb 2018
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hi Michel
Just a bit of advice from an OLD Gezzer (spelling) when you get to mounting the dummy in the cowl chack the balance of your bird and if nose weight is needed, like both of mine, so on my current one I needed several oz's of nose weight so I backfilled it with #6 lead shot mixed with epoxy added a 1/8 ply back plate to it fitted as necessary and when doing a final balance I only had to add 1oz at the fire wall to get the correct nose down with the gear up.
Hope this might help
Cheers Bob T
Just a bit of advice from an OLD Gezzer (spelling) when you get to mounting the dummy in the cowl chack the balance of your bird and if nose weight is needed, like both of mine, so on my current one I needed several oz's of nose weight so I backfilled it with #6 lead shot mixed with epoxy added a 1/8 ply back plate to it fitted as necessary and when doing a final balance I only had to add 1oz at the fire wall to get the correct nose down with the gear up.
Hope this might help
Cheers Bob T
My Feedback: (12)
Join Date: Dec 2001
Location: INDIANAPOLIS,
IN
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I have a NIB complete set of Century Jet retracts (mains only) including air tank for this plane that I won't use. Willing to sell for $150 plus shipping
These are air operated retracts
These are air operated retracts
Last edited by flyindy; 12-29-2018 at 05:44 PM. Reason: added information
My Feedback: (2)
Hey guys, I was "fortunate" enough to pick up a partially built GS Corsair, with Robart elec. retracts included. I have experience with Robarts air units (in my TF giant P-47) but not the electric ones...nor has anyone in my club. What do I need to know to keep them operating dependably? Has anyone had problems? Thanks....
I have the CJ electrics in my 60 size Corsair, and the only thing to make sure of, use a separate battery pack, and keep them clean. Don't wrap the control box either, it needs to be vented as it heats up. Use that velcro type attachment to secure it.
Not sure how the Robarts senses the end points, but the CJ uses resistance, so the screw drive needs to be kept clean and the movement smooth through out. Also don't cycle them a lot, just as needed so the controller doesn't get too warm. Do this and they will outlast the plane.
Not sure how the Robarts senses the end points, but the CJ uses resistance, so the screw drive needs to be kept clean and the movement smooth through out. Also don't cycle them a lot, just as needed so the controller doesn't get too warm. Do this and they will outlast the plane.
My Feedback: (3)
If anyone is interested in a complete set of 3 actuators to convert the large retracts to electric let me know. They are new and I have the controller board too. I’m not going to use them so they sit in my stash of parts.
My Feedback: (3)
I’d take $275 + shipping
includes two actuators for the mains and one for the tail gear
one control board
all new parts
This actuator set will convert the larger Robart air retracts to electric, compatible with some mid size retracts too.
If your looking at this for a wing mechanism you will have to design something like the Comp ARF hinges for their Corsair. I’d guess they don’t have enough throw for that application.
includes two actuators for the mains and one for the tail gear
one control board
all new parts
This actuator set will convert the larger Robart air retracts to electric, compatible with some mid size retracts too.
If your looking at this for a wing mechanism you will have to design something like the Comp ARF hinges for their Corsair. I’d guess they don’t have enough throw for that application.
Hi
Could any one help me here for what size spinner for the topFlite Corsair Giant In the manual nor on the plans , can I find the diameter of the spinner . I want to order a TrueTurn , But I need a reference to go by ,what Diameter do I need
Thanks looking in
Michel
Could any one help me here for what size spinner for the topFlite Corsair Giant In the manual nor on the plans , can I find the diameter of the spinner . I want to order a TrueTurn , But I need a reference to go by ,what Diameter do I need
Thanks looking in
Michel
My Feedback: (2)
Join Date: Apr 2010
Location: columbus ,
OH
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Prop hub
Michel you first need the engine if it’s a zdz Engines USA 56rvj you will need a six bolt hub and I run a 23/10 falcon ww2 prop on mine call true turn direct and they will tell you what you need and and they are about 60$ shipped
It has been a long time since I have posted in here. I keep checking back on this thread (Book...... Encyclopedia collection) from time to time to reference all the great knowledge that is in here. Well, my plane is still not done, but have made a lot of progress. Just haven't taken the time to do posts. So I thought I would throw up some pictures and show this 10 year on and off project. So much has changed.
I wonder if it would be worth while to spend the time needed to convert the parts into SVG for creating laser cut parts for this particular model, os do the Ziroli or other plans build planes that have the parts on the plans and not a sheet in the boot that needs to be properly sized first. Would there be a market for it?
Can anyone who has the plans out give me the measurement for them? I want to print out the PDF I have, but its size at 22 x 8.5, but scales up nicely, just need the size for the printer to make a copy of it.