Brian Taylor FW 190 A-4
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Brian Taylor FW 190 A-4
this winter i have built the brian Taylor FW 190.
Wingspan - 150Cm - probably about 60 Inches,
Engine will be used 0.60,.. what shoul i write more - shall i give here some photos? - or the whole building report? Are you interested?
Let me know.
Sincerely
Tomas from Prague /Czech Republic
Wingspan - 150Cm - probably about 60 Inches,
Engine will be used 0.60,.. what shoul i write more - shall i give here some photos? - or the whole building report? Are you interested?
Let me know.
Sincerely
Tomas from Prague /Czech Republic
#5
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
Hi folks, so all right,... i post some photos, how it all started, how it was.. and how it is...
How it will be i do not know, because of the maid hasn't been done yet...
And please sorry for my english..
How it will be i do not know, because of the maid hasn't been done yet...
And please sorry for my english..
#12
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
so / you can see, that my FW is painted... it will not take a lot of time to be ready to fly... i think...- till the picture will be uploaded..
#13
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
So.. here are the last pictures of my Fw..- i hope, that you enjoyed it.- also hope i, that it will fly...
Now.. iam building the TA 152 H - so if you are interested, i can make an report here in this forum too..
The build took me abou 4 months. I should have the flaps there, but my son (see some pics) did destroy it.. and me - angry .. didnot make it again...)))§
BTW- does anybody have an plan for the Bf 109? - i can offer you plan for any other warbird i have... Send me an e-mail for [email protected] and i will send you my list of plans. Most of them i have in electronic form, so the stuff will be in your hands in a quick..
Have a nice day...
And tell me your opinion about my flyer..
Bye
Tomas from Prague
Now.. iam building the TA 152 H - so if you are interested, i can make an report here in this forum too..
The build took me abou 4 months. I should have the flaps there, but my son (see some pics) did destroy it.. and me - angry .. didnot make it again...)))§
BTW- does anybody have an plan for the Bf 109? - i can offer you plan for any other warbird i have... Send me an e-mail for [email protected] and i will send you my list of plans. Most of them i have in electronic form, so the stuff will be in your hands in a quick..
Have a nice day...
And tell me your opinion about my flyer..
Bye
Tomas from Prague
#14
RE: Brian Taylor FW 190 A-4
tomas, i like your build. that's a unique camo scheme you picked, one i haven't seen before. i may have to "borrow" it for a Platt 190 i'm starting. please post how she flies. nice job!
#15
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
Hi folks,
as you can see, my Focke wulf is built,... and i make a next try to build something..
At this time is my Brian Taylor 190 A-4 for sale..
What should i write to this plane? The building process is documented here in the thread, so you can see, that the plane has not the retracts, because we have the grass airport, i mounted the fixed gear.
The gear is now a little scale - during the landing was the wing a little damaged, but nothing complicated - now it is like before.. painted and you see nothing, but i think it is fair to write it here.
Plane flew 15x, so it is not used much, weathered, painted with matt latex colours, according to the real Plane of H. Sterr /JG 54 - eastern front- March 1943
About the diametres..- the plane is in wingspan 152 cm - about 63 Inches,.. (i hope, that the conversion is good).
Engine - i mounted the MVVS 0.60 2-stroke - it flies really nice, but with the 0.90 2-stroke could be this plane like an arrow.
The price and other conditions would be arranged by e- mail [email protected] or via phone - +420 777 049 012.
if you act quickly... the proce favour is sure..
Regards
Tomas from Prague
as you can see, my Focke wulf is built,... and i make a next try to build something..
At this time is my Brian Taylor 190 A-4 for sale..
What should i write to this plane? The building process is documented here in the thread, so you can see, that the plane has not the retracts, because we have the grass airport, i mounted the fixed gear.
The gear is now a little scale - during the landing was the wing a little damaged, but nothing complicated - now it is like before.. painted and you see nothing, but i think it is fair to write it here.
Plane flew 15x, so it is not used much, weathered, painted with matt latex colours, according to the real Plane of H. Sterr /JG 54 - eastern front- March 1943
About the diametres..- the plane is in wingspan 152 cm - about 63 Inches,.. (i hope, that the conversion is good).
Engine - i mounted the MVVS 0.60 2-stroke - it flies really nice, but with the 0.90 2-stroke could be this plane like an arrow.
The price and other conditions would be arranged by e- mail [email protected] or via phone - +420 777 049 012.
if you act quickly... the proce favour is sure..
Regards
Tomas from Prague
#17
Senior Member
My Feedback: (5)
Join Date: Oct 2002
Location: An Iceburg in, ANTARCTICA
Posts: 6,747
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
ORIGINAL: Moelders
And something more -
please,.. sorry my english...
Have a nice day
Tomas
And something more -
please,.. sorry my english...
Have a nice day
Tomas
Your english is much better than my czech!
That's the same scheme I planned on using on my Vailly 190 I just got the plans for. Actually, mine may be for yellow -4, I will have to dig out my docs.
#18
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
thank you... - i think, that it could be much better with my english.
i would like to write something clever,... but when we learned to write in the school,.. i was ill at this time...
i would like to write something clever,... but when we learned to write in the school,.. i was ill at this time...
#19
My Feedback: (139)
Join Date: Jan 2002
Location: Lexington , KY
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
Guys,
I love the paint scheme. Do either of you have any more documentation on who's plane that is, where might I get more detailed photos of the paint scheme? I'm building a meister scale and would love this plane.
Thanks,
PJ
I love the paint scheme. Do either of you have any more documentation on who's plane that is, where might I get more detailed photos of the paint scheme? I'm building a meister scale and would love this plane.
Thanks,
PJ
#20
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
#21
Junior Member
Join Date: Dec 2010
Location: tinténiac, FRANCE
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
hi ,
I am French and I do not speak English very well,
Very attractive construction, I realize at present the same plane.
Itis in court of finish.
Here are some photos, you can see it here: http://www.modelisme.com/forum/aero-...an-taylor.html
I shall wish to know howit steals(flies), ifit is easy to fly.
thanks you,
#22
Senior Member
Thread Starter
Join Date: Jul 2004
Location: PyselyEurope, CZECH REPUBLIC
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
hello,
if you build it light, then it flies well.
(Ive built it without flaps).. and it was a mistake - the landings were a bit tricky.
In the air - it flies fantastic,.. and the look is perfect too.
Best regards
Tomas
if you build it light, then it flies well.
(Ive built it without flaps).. and it was a mistake - the landings were a bit tricky.
In the air - it flies fantastic,.. and the look is perfect too.
Best regards
Tomas
#23
Junior Member
Join Date: Dec 2010
Location: tinténiac, FRANCE
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brian Taylor FW 190 A-4
hi ,
thanks you very much for you answer,
I have lightbuild 3kg500 in state of flight. I've a flap.
i'm very happy to know how is fly.
best regards
Pascal
thanks you very much for you answer,
I have lightbuild 3kg500 in state of flight. I've a flap.
i'm very happy to know how is fly.
best regards
Pascal