My new Ziroli 98" P-51 build
#1
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
My new Ziroli 98" P-51 build
Hi P-51 lover's,
I just got done cutting out all of my parts for my new Ziroli 98" P-51.
It only took me 3 days to cut and on day 5 I have the fuse framed and the stab framed.
I call to Nick Ziroli and odered all the fiberglass parts and the canapy. Next will be to get the gear and the wheels, then frame up the vert stab and the wing FUN WOW!! here are some pic's
sorry for the mess in the in the back of the pic but it is dark outside so I had to take the pic's
in the back room. more to come.
Regards,
Dan Crawford
I just got done cutting out all of my parts for my new Ziroli 98" P-51.
It only took me 3 days to cut and on day 5 I have the fuse framed and the stab framed.
I call to Nick Ziroli and odered all the fiberglass parts and the canapy. Next will be to get the gear and the wheels, then frame up the vert stab and the wing FUN WOW!! here are some pic's
sorry for the mess in the in the back of the pic but it is dark outside so I had to take the pic's
in the back room. more to come.
Regards,
Dan Crawford
#2
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Hi,
As you can see in pic 5 I used 1/4x1/4 hard wood for the stab spar's as I do not trust
balsa spars in a giant scale tail.
Regards,
Dan Crawford
As you can see in pic 5 I used 1/4x1/4 hard wood for the stab spar's as I do not trust
balsa spars in a giant scale tail.
Regards,
Dan Crawford
#4
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Ram-bro,
Thank you, I know that it is not 100% scale but it is not far off. As far as I know the only
100% scale P-51 is Dave platt's but it is a small plane.
Regards,
Dan Crawford
Thank you, I know that it is not 100% scale but it is not far off. As far as I know the only
100% scale P-51 is Dave platt's but it is a small plane.
Regards,
Dan Crawford
#7
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Tmoth4,
Thank you,
I am doing my best to try to get it done for next year's Carl Hauger's Warbirds over Delaware.
A lot of work to go!
Regards,
Dan Crawford
Thank you,
I am doing my best to try to get it done for next year's Carl Hauger's Warbirds over Delaware.
A lot of work to go!
Regards,
Dan Crawford
#8
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Hi all,
I only had time today to work on the tail, wife has me doing her work so she can sleep LOL!
MUST BE NICE!!
Regards,
Dan Crawford
I only had time today to work on the tail, wife has me doing her work so she can sleep LOL!
MUST BE NICE!!
Regards,
Dan Crawford
#9
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Hi all,
Well I got out to the shop tonight for a little work on the Ziroli P-51. I sheeted the top deck
and built a nice cockpit tub out of 1/8 balsa, When my Robart 160 tail wheel comes in I will
install the pushrods and sheet the rest of the fuse. I also instaled the firewall, I went with a
3/4 firewall as if I go with a bigger engine I did not want to be stuck with a 1/2" firewall.
Here are some more pic's I think they came out ok you all tell me!
Regards,
Dan Crawford
Well I got out to the shop tonight for a little work on the Ziroli P-51. I sheeted the top deck
and built a nice cockpit tub out of 1/8 balsa, When my Robart 160 tail wheel comes in I will
install the pushrods and sheet the rest of the fuse. I also instaled the firewall, I went with a
3/4 firewall as if I go with a bigger engine I did not want to be stuck with a 1/2" firewall.
Here are some more pic's I think they came out ok you all tell me!
Regards,
Dan Crawford
#10
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Hi all,
Any of you scale builders out there have any nice pic's of your P-51 cockpits you can post.
I am going to scratch build my cockpit out of balsa and plastic, I know I can go online and
get a cockpit but it would not be the same as building one with my own two hands.
What is a little hard work, I do not work any more as I have terminal cancer so im home all day
so what the hell!! Plesae post your cockpit pic's any help would be good.
Regards,
Dan Crawford
Any of you scale builders out there have any nice pic's of your P-51 cockpits you can post.
I am going to scratch build my cockpit out of balsa and plastic, I know I can go online and
get a cockpit but it would not be the same as building one with my own two hands.
What is a little hard work, I do not work any more as I have terminal cancer so im home all day
so what the hell!! Plesae post your cockpit pic's any help would be good.
Regards,
Dan Crawford
#11
My Feedback: (101)
RE: My new Ziroli 98" P-51 build
Dan, its looking good. Sorry to hear about your cancer, I am sure we will keep you in our prayers. Boy I can see when you get to the wing....your gonna be looking for room. Wish I had some pics of a good cockpit for you. Glad to see you are doing everything from scratch, puts those HDas to shame ( high dollar arfs) You should check out my thread and spread some of that wisdom and skill.
#12
My Feedback: (10)
RE: My new Ziroli 98" P-51 build
WOW, what a great project, I look forward to reading this as you progress. What engine is typically used in this size plane? I'm guessing an 80 or inline 100. I have a TF P-51 that I have lost the will to build at the moment. I sure do enjoy looking at how others can do it.
#13
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Ram-bro,
I to am sick of all the ARF'S, no one builds from scratch any more. We live in a world of
do things fast, No one uses there skills any more.
To (Ken Bryant,)
Thank you, Im having fun with this P-51 build. I am going to use a G-62 gas engine
as that is the engine Ziroli shows in the plans. I will not be on the net for the next 2 days
as my computer is going on the blink so it will be in the shop, I will post more pic's then
Regards,
Dan Crawford
I to am sick of all the ARF'S, no one builds from scratch any more. We live in a world of
do things fast, No one uses there skills any more.
To (Ken Bryant,)
Thank you, Im having fun with this P-51 build. I am going to use a G-62 gas engine
as that is the engine Ziroli shows in the plans. I will not be on the net for the next 2 days
as my computer is going on the blink so it will be in the shop, I will post more pic's then
Regards,
Dan Crawford
#14
Senior Member
My Feedback: (2)
Join Date: Apr 2004
Location: Wallingford,
CT
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Dan this is one of my 3 favorite warbirds and yours looks great. We havent morphed a mustang yet but if we do I hope its one built from Nick's plans. I am going to be glued to this tread and I too plan on going to WOD, hope to see you there.
Ron Randall
Ron Randall
#15
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Metalmorphous,
Thank you,
I want to go to WOD so bad as I have never been there. I know people ask you all the time
but do you know what the cost would be to morph my Ziroli P-51???I cant work any more
as im sick so money is tight but I would love to get my P-51 done by you.
Regards,
Dan Crawford
Thank you,
I want to go to WOD so bad as I have never been there. I know people ask you all the time
but do you know what the cost would be to morph my Ziroli P-51???I cant work any more
as im sick so money is tight but I would love to get my P-51 done by you.
Regards,
Dan Crawford
#16
Senior Member
My Feedback: (2)
Join Date: Apr 2004
Location: Wallingford,
CT
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Dan give me a call Monday, my number at the shop is 203 294-1314 and ask for me. I know individuals that have had to deal with cancer and I'm so impressed with there attitude and drive and wish I could do more for them. I would like very much to help you with this very special P-51 Mustang. I think with your building skills and our plating process it will be outstanding.
Look forward to talking to you
Ron Randall
Look forward to talking to you
Ron Randall
#18
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Hi all,
Any one know how to build a slidding canopy for the Ziroli P-51
I want to do it but never tryed it before. Cant go scale with out it.
Regards,
Dan Crawford
Any one know how to build a slidding canopy for the Ziroli P-51
I want to do it but never tryed it before. Cant go scale with out it.
Regards,
Dan Crawford
#19
Senior Member
My Feedback: (2)
Join Date: Apr 2004
Location: Wallingford,
CT
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Dan I enjoyed our conversation very much and I am looking forward to our next. I talked to everyone in the shop about your project and they all agree and are looking forward to helping you creatate a one of a kind P-51 Mustang. Jose has already started some research on some 3 views for the panel lines, now thats what I call service Now if we can just get someone to help you out with some nice Sierra retracts[8D]
Talk to you soon
Ron
Talk to you soon
Ron
#20
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Ron,
I liked talking to you aswell, sorry I did not post pic's lastnite my comp stoped working so im at my dad's to post pic's
I got my fiberglass parts and canopy today but I did not get pic's with them on the plane soon!
Regards,
Dan Crawford
I liked talking to you aswell, sorry I did not post pic's lastnite my comp stoped working so im at my dad's to post pic's
I got my fiberglass parts and canopy today but I did not get pic's with them on the plane soon!
Regards,
Dan Crawford
#21
Senior Member
My Feedback: (2)
Join Date: Apr 2004
Location: Wallingford,
CT
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Dan it looks like you grew out of the washing machine and had to move it to a larger table The sheeting looks great and your moving along nicely, when its time to do the glass work I can give you a few tips to help with the final look and cost of materials.
I can wait for the next batch of picture [8D]
Ron
I can wait for the next batch of picture [8D]
Ron
#22
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
Hi all,
Well I just got back from the hobby shop, I now have all the wood to do my wing.
Tonite I will cut all of the wing rib's and spars and get the shop table ready to build the wing
in 3 days when I get off my chemo (A LONG 3 DAYS!!!!!!) Any way im getting there.
I have been talking to Ron from Metalmorphous and we will be using his alum plating
process on the Ziroli P-51 so it will be a real show stoper. Ron is a real nice guy
he told me when I get the plane all glassed and ready to morph not to ship it he will fly down and pick it up! now how is that for service, I give that a 100% on my scale!!!!
well im off to cut cut cut!!! If you would like to look at Metalmorphous web site go to:
www.metal-morphous.com all kinds of cool things on his site when your there take a look at his Yellow P-38 and the F-100 he is plating for a nother guy. Nothing but the best for my P-51!!!
Regards,
Dan Crawford
Well I just got back from the hobby shop, I now have all the wood to do my wing.
Tonite I will cut all of the wing rib's and spars and get the shop table ready to build the wing
in 3 days when I get off my chemo (A LONG 3 DAYS!!!!!!) Any way im getting there.
I have been talking to Ron from Metalmorphous and we will be using his alum plating
process on the Ziroli P-51 so it will be a real show stoper. Ron is a real nice guy
he told me when I get the plane all glassed and ready to morph not to ship it he will fly down and pick it up! now how is that for service, I give that a 100% on my scale!!!!
well im off to cut cut cut!!! If you would like to look at Metalmorphous web site go to:
www.metal-morphous.com all kinds of cool things on his site when your there take a look at his Yellow P-38 and the F-100 he is plating for a nother guy. Nothing but the best for my P-51!!!
Regards,
Dan Crawford
#24
Senior Member
Thread Starter
Join Date: Dec 2004
Location: lockport,
NY
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
RE: My new Ziroli 98" P-51 build
BobH,
Thank you,
Well I just got word from Darrell from Sierra giant scale retracts, He is sending me a set of
main gear and the tail retract for the P-51 so the airframe will be sitting on a silkey smoth set of gear cool!!!
Regards,
Dan Crawford
Thank you,
Well I just got word from Darrell from Sierra giant scale retracts, He is sending me a set of
main gear and the tail retract for the P-51 so the airframe will be sitting on a silkey smoth set of gear cool!!!
Regards,
Dan Crawford