New Hangar 9 1.50 P-51 Build
#2854
My Feedback: (68)
I had this plane and remember trying a retract servo I had on hand and it didnt work out. It struggled operating them. I do know it wasn't a Hitec 75. Cant remember brand, its been around 7-8 yrs ago. I ended up getting the JR's which were great, but pricey. I think you're gonna find the Hitec wont work good since their only around a 100oz and the JR's are 260oz and they used every ounce working the retracts. I do remember that. And the JR's are Metal gears and the 75's are not.
#2858
Join Date: Mar 2018
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
P51 150
Rear exhaust to be added soon!
Tru-Turn spinner is very nice but doesn’t come cheep!
I know this is an old thread but I’m just pulling mine out the box to build it! She is getting a DLE 35 and will start out with a 19/8 prop. This should be a fun warbird. I flew my TP p-47 with the Saito FG-60 radial today and man was that a blast! Hope this one comes out nice as well! Here is a pic of the DLE 35 mounted. There is some craftsmanship that has to be done to get it mounted but came out perfect!
#2861
Join Date: Mar 2018
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Version 2 with Robart Electric retracts
Just now building my p51 and the robart gear I ordered for this model are too long! Long by about 1/4inch. Did anyone else have this issue or did they work fine for you?
Anybody have any measurements they can share? Robart is telling me they are right but it clearly is almost 1/4 to long and not on center. They were trying to rush me off the phone too! Somethings up. I clearly know I have version 2. If you go on their website you will see their measurements are not correct for this plane.
#2862
Join Date: Mar 2018
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Here are the drawings that Robart say fit this version 2 p51 150. I don’t think it’s correct! Can someone verify that has the robart gear?
https://cdn.shopify.com/s/files/1/03...53894066588207
Thank you, really would like to use the Robarts but just not fitting very well. Even the bolt holes don’t line up.
https://cdn.shopify.com/s/files/1/03...53894066588207
Thank you, really would like to use the Robarts but just not fitting very well. Even the bolt holes don’t line up.