26cc ESM WARBIRDS READY TO SHIP!!!
#654
My Feedback: (30)
Join Date: Mar 2005
Location: Lakeland,
FL
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
Yes, mine will be finished as Don Gentile's ride, Shangri-La.
When you order the markings, you get three complete airplane options
Will post pics when complete
When you order the markings, you get three complete airplane options
Will post pics when complete
#655
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
ORIGINAL: Mustang1971
a 2.4 cube engine is approx. 40cc's
a 2.4 cube engine is approx. 40cc's
#656
Junior Member
Join Date: Mar 2009
Location: Lahore, PAKISTAN
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
ORIGINAL: alanc
they are wide hinges, but the elevator destructions show three, the planes cut for 2,go figure?? i am using three, and yes, i think they are strong enough, what i do, is mark the centre, stick a pin in, drill down the centre of the hinge slot with a 1/8th drill, (this is for wicking the cyno in) place the hinge in, up to the pin, cyno both halves, putting the cyno down the hole, withdraw the pin, this way, they are spaced out a pins thickness, and equal amounts of hinge are deposited in both surfaces, do NOT glue just one surface at a time, and while you are doing all this, you have to jiggle the horn/bellcrank in too-fun, aint it!!!!!
they are wide hinges, but the elevator destructions show three, the planes cut for 2,go figure?? i am using three, and yes, i think they are strong enough, what i do, is mark the centre, stick a pin in, drill down the centre of the hinge slot with a 1/8th drill, (this is for wicking the cyno in) place the hinge in, up to the pin, cyno both halves, putting the cyno down the hole, withdraw the pin, this way, they are spaced out a pins thickness, and equal amounts of hinge are deposited in both surfaces, do NOT glue just one surface at a time, and while you are doing all this, you have to jiggle the horn/bellcrank in too-fun, aint it!!!!!
However I have a well equiped mechanical workshop at my disposal and will soon get a new one made.
Guys I think I need a Axis fighter to protect my Stuka, my son can fly the fighter but we have to choose which one. I am on a ledge here and I am going to fall any way, all I need is a shove in the right direction. We have Mustangs, Spitfire and P-38s at our field and they have been honing their skills.
Junaid Ali
#657
Senior Member
My Feedback: (4)
Join Date: Apr 2009
Location: Fort Lauderdale,
FL
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
ORIGINAL: Avaiojet
This ''cc'' stuff. 28cc, 30cc. Exactly what does this mean? My Brison 2.4, what would be the cc's?
This ''cc'' stuff. 28cc, 30cc. Exactly what does this mean? My Brison 2.4, what would be the cc's?
#658
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
Nothing hard about that.
Brison 2.4
2.4ci=39cc
So, that would make those 28cc engines a bit smaller. Possibly the right size for my 64" Stearman.
What size prop are those 28cc engines using?
Charles
Brison 2.4
2.4ci=39cc
So, that would make those 28cc engines a bit smaller. Possibly the right size for my 64" Stearman.
What size prop are those 28cc engines using?
Charles
#659
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
Tomas
Here is a video of the Mc205 that me and my budy got from you last summer great airplane.
http://www.youtube.com/watch?v=JmHEVG76WDs
tom bell
Here is a video of the Mc205 that me and my budy got from you last summer great airplane.
http://www.youtube.com/watch?v=JmHEVG76WDs
tom bell
#662
Senior Member
My Feedback: (21)
Join Date: Apr 2005
Location: Morrisville,
PA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
Tomas,
I've done a search on this forum concerning the L4 Grasshopper and found only 2 hits, one a general question that went unanswered and another mention that a 90" L4 would be available in 2010. Can you enlighten us with a link to the plane? A picture or a spec sheet? Some idea of an approximate price and availability date??
Thanks in advance for any info that you can supply.
I've done a search on this forum concerning the L4 Grasshopper and found only 2 hits, one a general question that went unanswered and another mention that a 90" L4 would be available in 2010. Can you enlighten us with a link to the plane? A picture or a spec sheet? Some idea of an approximate price and availability date??
Thanks in advance for any info that you can supply.
#664
Senior Member
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
ORIGINAL: Mustang1971
Almost done with my ''Frank Tiano Series'' P-51B! RC SV 26 powered. Should fly this weekend!
Almost done with my ''Frank Tiano Series'' P-51B! RC SV 26 powered. Should fly this weekend!
#666
Thread Starter
My Feedback: (77)
Join Date: Apr 2002
Location: Bryan, TX
Posts: 3,157
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
GENTS...YES... IN LATE MARCH the NEW KMP SPORT SERIES launches with the new:
KMP PC9
Engine: Aerovate 20cc gas or 4 STROKE 100-125
Wingspan 71"
KMP L4 GRASSHOPPER with FLAT OD PAINT, invasion stripes, working suspension, opening doors,
rocket tubes...
Engine: 20cc gas or 4 STROKE 100-125
Wingspan 95"
THE NEW L4 GRASSHOPPER is $449
PC-9 USAF COLORS IS $399
PC-9 RCAF COLORS is $399
RETRACTS WILL BE OEM SPEC by ROBART and @ VQ WARBIRDS we will also offer the SIERRA PRECISION VERSION for
the most discriminating modelers.
EMAIL TO GET ON THE LIST NOW/PREORDER... DELIVERY BEGINS in late MARCH...
[email protected]
www.vqwarbirds.com
-TOMAS
VQ WARBIRDS
"KEEP 'EM FLYING"
www.vqwarbirds.com
[email protected]
KMP PC9
Engine: Aerovate 20cc gas or 4 STROKE 100-125
Wingspan 71"
KMP L4 GRASSHOPPER with FLAT OD PAINT, invasion stripes, working suspension, opening doors,
rocket tubes...
Engine: 20cc gas or 4 STROKE 100-125
Wingspan 95"
THE NEW L4 GRASSHOPPER is $449
PC-9 USAF COLORS IS $399
PC-9 RCAF COLORS is $399
RETRACTS WILL BE OEM SPEC by ROBART and @ VQ WARBIRDS we will also offer the SIERRA PRECISION VERSION for
the most discriminating modelers.
EMAIL TO GET ON THE LIST NOW/PREORDER... DELIVERY BEGINS in late MARCH...
[email protected]
www.vqwarbirds.com
-TOMAS
VQ WARBIRDS
"KEEP 'EM FLYING"
www.vqwarbirds.com
[email protected]
#668
Thread Starter
My Feedback: (77)
Join Date: Apr 2002
Location: Bryan, TX
Posts: 3,157
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
GENTS,
ESM 81" T-28s
ESM 90" FIESELER STORCH
ESM 80" LA-7s
ESM 80" WINTER CAMO STUKAs
ESM 80" JU-87B YELLOW NOSE/TAIL STUKAS
ESM 85" SWORDFISH
ESM 70.5" FW-190s
ESM 72.5" SPITFIRES
ARE ALL ARRIVING IN A FEW DAYS!! IF YOU WANT ONE OF THE SOLD OUT SWORDFISH MODELS or SOLD OUT T-28s,,, we may have 1 or 2 available of each ... one or two customers are not going to be able to follow through with their orders...
SO YOU HAVE a small opportunity to get one of these models!
EMAIL me if you want in on one... [email protected]
THE STORCH is almost sold out ...
-CHEERS!
TOMAS
VQ WARBIRDS
"KEEP 'EM FLYING"
www.vqwarbirds.com
ESM 81" T-28s
ESM 90" FIESELER STORCH
ESM 80" LA-7s
ESM 80" WINTER CAMO STUKAs
ESM 80" JU-87B YELLOW NOSE/TAIL STUKAS
ESM 85" SWORDFISH
ESM 70.5" FW-190s
ESM 72.5" SPITFIRES
ARE ALL ARRIVING IN A FEW DAYS!! IF YOU WANT ONE OF THE SOLD OUT SWORDFISH MODELS or SOLD OUT T-28s,,, we may have 1 or 2 available of each ... one or two customers are not going to be able to follow through with their orders...
SO YOU HAVE a small opportunity to get one of these models!
EMAIL me if you want in on one... [email protected]
THE STORCH is almost sold out ...
-CHEERS!
TOMAS
VQ WARBIRDS
"KEEP 'EM FLYING"
www.vqwarbirds.com
#669
Junior Member
Join Date: Jan 2010
Location: Sarasota,
FL
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
Thrusday is 'open the container day' , which means our new batch of ESM models are here, and they will be ready to ship very soon!!!
And to those who have pre-ordered, Thanks! Your boxes will be going out right away
And to those who have pre-ordered, Thanks! Your boxes will be going out right away
#671
My Feedback: (13)
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
ORIGINAL: Dean TBM
Thrusday is 'open the container day' , which means our new batch of ESM models are here, and they will be ready to ship very soon!!!
And to those who have pre-ordered, Thanks! Your boxes will be going out right away [img][/img]
Thrusday is 'open the container day' , which means our new batch of ESM models are here, and they will be ready to ship very soon!!!
And to those who have pre-ordered, Thanks! Your boxes will be going out right away [img][/img]
#674
Join Date: Jan 2007
Location: Daniels,
WV
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: 26cc ESM WARBIRDS READY TO SHIP!!!
Hey TAILSKID! WELCOME TO THE CLUB. RAM-BRO AND I ARE LOOKING FORWARD TO GOING OUT AND SINKING THE BISMARK. GLAD TO HEAR YOU ARE GOING TO BE A WINGMAN TO.