Fliteskin ME 109F build thread
10-26-2012, 09:18 PM
#1103
RE: Fliteskin ME 109F build thread
I'm considering not having an operating canopy....If I don't get judged for the cockpit area, why complicate it anymore than it needs.
I can install the cockpit sides, pilot, canopy,and instrument panel, and be done with it....and of course the canopy frame...
any input guys?
I can install the cockpit sides, pilot, canopy,and instrument panel, and be done with it....and of course the canopy frame...
any input guys?
10-26-2012, 09:23 PM
#1104
RE: Fliteskin ME 109F build thread
drilling out for the 20 MM cannon in the spinner is the last thing other than paint and the final placement of some electronics and it would be ready to maiden...
I can get it painted by next week....
Casey
I can get it painted by next week....
Casey
11-17-2014, 02:30 AM
#1112
Hello Casey!
I´m going to build this Fliteskin Bf-109. I would like to buy some good scale pilot. I´ve checked Phil´s website. I found there some scale accessories but no scale pilot. Could send me the link where can I found the yours please?
I´m going to build this Fliteskin Bf-109. I would like to buy some good scale pilot. I´ve checked Phil´s website. I found there some scale accessories but no scale pilot. Could send me the link where can I found the yours please?
11-17-2014, 09:39 AM
#1113
Senior Member
My Feedback: (1)
Join Date: May 2003
Location: Czech Republic
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Hi Perkin
Try this: http://bestpilots.typepad.com/my_web...ffe-pilot.html
Jose's 109 is really great. I do have one still in box, unfortunately.
Try this: http://bestpilots.typepad.com/my_web...ffe-pilot.html
Jose's 109 is really great. I do have one still in box, unfortunately.
08-04-2016, 07:19 AM
#1117
as you can see, paint is on for tomorrow....thank god for no more rivets...Yes, I had a few "pop", and a few that could have used some more primer, but hey...it was fun, but it's over LOL
I still have abit of fine sanding to do on the rivet lines but not much really in the scope of it all....
I kinda like it...somewhat random in places, but not too much I hope...
well a couple more row's anyways....
I still have abit of fine sanding to do on the rivet lines but not much really in the scope of it all....
I kinda like it...somewhat random in places, but not too much I hope...
well a couple more row's anyways....
what size brass tubing did you use on these rivets?
JG
07-27-2018, 12:09 PM
#1118
Hi Casey,
A lot of time has passed, so how is your Fliteskin 109 getting along ?
Any flight experience with that bird from your side . I would be eager to know since I am doing one of Jose`s kits as well !
see you
Hans
A lot of time has passed, so how is your Fliteskin 109 getting along ?
Any flight experience with that bird from your side . I would be eager to know since I am doing one of Jose`s kits as well !
see you
Hans
12-17-2018, 11:42 AM
#1120
Hi all,
Well, no answer to be expected !
Obviously, I seem to be the only guy on this planet that is really going to make such a Fliteskin 109 airworthy !
If you want, you can follow the build on RCSB, chapter Fliteskin, Me 109 e-powered
see you
Hans from Switzerland
Well, no answer to be expected !
Obviously, I seem to be the only guy on this planet that is really going to make such a Fliteskin 109 airworthy !
If you want, you can follow the build on RCSB, chapter Fliteskin, Me 109 e-powered
see you
Hans from Switzerland
