RE: TF FW190 GIANT ARF
Hey Terry,
looking forward to see the mods on this arf. I have some tail retratcs if you need. JG |
RE: TF FW190 GIANT ARF
I have enough wulfs in my house to scare little red riding hood to death :D
|
RE: TF FW190 GIANT ARF
any little Piggies hanging around this Wulf?:D
|
RE: TF FW190 GIANT ARF
ORIGINAL: tfarmer96 so i pulled my wulf out of the box and tossed it on the build table. What i like most about topflite is you can use the gear they send with the bird. I was however surprised it didnt have a non retractable tail gear with it. Im not doing any major mods to this bird just putting it together and flying it. I just want a new beater fly the wings off of. i have to hand it to them on this one you can tell they sat down and put some thought in to this. Hope to have it ready to CG and maiden soon. |
RE: TF FW190 GIANT ARF
1 Attachment(s)
ORIGINAL: SteveD-RCU ORIGINAL: tfarmer96 so i pulled my wulf out of the box and tossed it on the build table. What i like most about topflite is you can use the gear they send with the bird. I was however surprised it didnt have a non retractable tail gear with it. Im not doing any major mods to this bird just putting it together and flying it. I just want a new beater fly the wings off of. i have to hand it to them on this one you can tell they sat down and put some thought in to this. Hope to have it ready to CG and maiden soon. |
RE: TF FW190 GIANT ARF
I thought the 85 was the correct size. LOL!!
|
RE: TF FW190 GIANT ARF
ORIGINAL: Thunderbolt47 I thought the 85 was the correct size. LOL!! |
RE: TF FW190 GIANT ARF
I am unhappy also that we didn't get a non-retract tail wheel as I have been useing them in the last TF Mustangs I have put together.
But, fortunately I have one left over from a deceased Mustang that I will try to use. I just want a nice weekend flyer that I haven't spent my whole time on building and that make's for less stress on me at my age. Jim |
RE: TF FW190 GIANT ARF
If I was to guess. I'd say they left out the tail retract as an attempt to keep the weight down. The FW 190 has a very short nose, and anything set aft really starts to add up quick.
Casey |
RE: TF FW190 GIANT ARF
I know if I were to do another, It would have a non retracting tail wheel to prevent some complication and weight.
|
RE: TF FW190 GIANT ARF
ORIGINAL: glazier808 If I was to guess. I'd say they left out the tail retract as an attempt to keep the weight down. The FW 190 has a very short nose, and anything set aft really starts to add up quick. Casey Mmmmm I wonder why then, they have two lead/steel weights already bolted to the firewall? Anyways I agree with you about the short nose and by not useing a Robart tailwheel on the P-51 will make a difference on where to put the receiver battery in them. |
RE: TF FW190 GIANT ARF
Not the shipping weight...
They are trying to keep you from having to add a couple more lead blocks to the ones you have. Casey |
RE: TF FW190 GIANT ARF
any one know if nose weight was needed to make this thing cg correctly?
|
RE: TF FW190 GIANT ARF
I added a ton, then added some more after the test flights. Flies great now.
|
RE: TF FW190 GIANT ARF
How much? Sounds like the G62 would be a better option..
|
RE: TF FW190 GIANT ARF
ORIGINAL: tp777fo I added a ton, then added some more after the test flights. Flies great now. How much 2lbs....8? |
RE: TF FW190 GIANT ARF
I did not add any weight, build a tray on top of the motor for the ignition battery, moved the gas tank over the cg, receiver batts as close to the firewall as possible,
and Pneumatic tail wheel retract , using a DA-50 for power, it flies great...... |
RE: TF FW190 GIANT ARF
ORIGINAL: tfarmer96 ORIGINAL: tp777fo I added a ton, then added some more after the test flights. Flies great now. How much 2lbs....8? |
RE: TF FW190 GIANT ARF
ORIGINAL: loucel-RCU I did not add any weight, build a tray on top of the motor for the ignition battery, moved the gas tank over the cg, receiver batts as close to the firewall as possible, and Pneumatic tail wheel retract , using a DA-50 for power, it flies great...... |
RE: TF FW190 GIANT ARF
I'm going to go with a good old Zenoah g-45 for power as all out speed is not what I am looking for and if needed a G- 62 will then drop right in.
|
RE: TF FW190 GIANT ARF
1 Attachment(s)
Well i said i wasnt go to mod this thing. Well you cant always go with whats in the box. Got about 2 hours worth of work in it now.
|
RE: TF FW190 GIANT ARF
Looking good my friend. After the holidays, i'll be ready for paint. I completed the panel lines today and will hit it with another full final coat Monday if possible. I have everything in it other then a few servos in the fuse and I'm waiting on my receiver from Horizon and Lipo batteries from Hobbyking. I moved everything to include the air system under the gun hood. The only things that will be in the fuse are the rudder, tail wheel and elevator servos. I do this on all my FW190's. I wonder how much help adding the sierra retracts will have on the nose weight issue.
|
RE: TF FW190 GIANT ARF
Hey Ron, did ya open the box yet,huh, did ya, did ya, huh,huh did ya. Zenoah? Thought you were goin' electrisical!!!:D
|
RE: TF FW190 GIANT ARF
Jimmie, I've got it in the shop and the box is huge and still unopened. I might still go with big out runner for power. It for now the G-45 drops right in and more than likely will not need more nose weight. I'll decide once I get to read the AMA magazine review and get my hands on it.
|
RE: TF FW190 GIANT ARF
The G-45 fits ok? Hmms..what about the care / muffler? All that inside the cowl too?
|
All times are GMT -8. The time now is 04:39 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.