Hi guys , I started with 1/4 FW A8 wing plugs for composite molds. The plan is to make the wood construction and to cover it with plywood 2.4mm , then all to cover with aluminium sheets rivets and panels as the original plane Attachment 2263969:)
So I start with one half wing

http://www.fokkerc.com/snimki/FW/A8/COMP (1).jpg

http://www.fokkerc.com/snimki/FW/A8/COMP (2).jpg

http://www.fokkerc.com/snimki/FW/A8/COMP (3).jpg

http://www.fokkerc.com/snimki/FW/A8/COMP (4).jpg

http://www.fokkerc.com/snimki/FW/A8/COMP (5).jpg

http://www.fokkerc.com/snimki/FW/A8/COMP (6).jpg

http://www.fokkerc.com/snimki/FW/A8/COMP (7).jpg

The up site is ready

http://www.fokkerc.com/snimki/FW/A8/com (7).jpg

http://www.fokkerc.com/snimki/FW/A8/com (8).jpg

http://www.fokkerc.com/snimki/FW/A8/com (9).jpg

Check out the video from the maiden flight of our FW 190 A8 in 1:5 scale! The model flies with Saito FG603R3 and is built and piloted by Oliver Leinbach

https://www.youtube.com/watch?v=Enhb...ature=youtu.be

Guys , here is the progress on 1/3 FW 190 A8 of Ivan Cadenas from Spain, his build is awesome :

http://www.fokkerc.com/snimki/FW/A8/ivan (2).jpg

http://www.fokkerc.com/snimki/FW/A8/ivan (1).jpg

http://www.fokkerc.com/snimki/FW/A8/ivan (3).jpg

http://www.fokkerc.com/snimki/FW/A8/ivan (4).jpg

http://www.fokkerc.com/snimki/FW/A8/ivan (5).jpg

http://www.fokkerc.com/snimki/FW/A8/ivan (6).jpg