I agree, just picked up his FW-190 A at estate sale with fiberglass fuse and both foam wing and build up wing.

I am building a Jerry Bates Moth Minor cut by Bob. His wood selection and laser cutting are as good as it gets. I also have an HE 100D cut by him, Jerry Bates design, and then a Fiberglass FW 190 D 9 with a wood wing. THe Moth Minor will be done quickly, but I am really looking forward to the HE 100D.

Fliteskin Ta152 wheater brake flying:
Inner gear doors were removed, they were getting stuck open
http://www.rcuniverse.com/forum/atta...mentid=2143916
JG

The Ta152 flying (clickable HR pics)

http://www.rcuniverse.com/forum/atta...mentid=2146007 http://www.rcuniverse.com/forum/atta...mentid=2146008 http://www.rcuniverse.com/forum/atta...mentid=2146009 http://www.rcuniverse.com/forum/atta...mentid=2146010 http://www.rcuniverse.com/forum/atta...mentid=2146011
JG

Here is my BH FW 190. DLE 30 and Spring Air retracts. Its light and flys very will and is easy landing. http://www.rcuniverse.com/forum/atta...mentid=2146355http://www.rcuniverse.com/forum/atta...mentid=2146356

Also is my late and not necessarily lamented CMP 109F. I was given this plane by a club member. It was much for him to handle. It had the gear moved forward to prevent nose overs and had a DLE 20. It was a handful for me too but I eventually got the take offs and landing down, for the most parts. Later installed an NGH 35, it needed the power. Installed an inexpensive (cheap) Hobby King gyro. It really helped the take offs until it malfunctioned and interfered with the receiver. Plane rolled onto its back and went straight in. Totaled. I'm considering getting a ESM 109 just to use the Sierra gear.http://www.rcuniverse.com/forum/atta...mentid=2146364http://www.rcuniverse.com/forum/atta...mentid=2146365

Hi all some shots on the gun bay in the 1/3 Dora,,
Slowly tacking shape...
Cheers GBhttp://www.rcuniverse.com/forum/atta...mentid=2156845http://www.rcuniverse.com/forum/atta...mentid=2156845

Will try another,,,
http://www.rcuniverse.com/forum/atta...mentid=2156846

Hey Jetjockgb,

Is that Detlef's big D9 or another 1/3rd D9? Just awesome work!!

Are there more build pics? I checked Phil's thread at RSCB but no updates over there to this level.

Very cool to use the EDF inside the supercharger.

Thanks for any info.

Joe

Hi Joe,
It's bigger than Dealers one this D9 is 3.7meter Long!!!!
I used to post up here all the time doing my builds, you can catch me on Face book under graham buchanan or my Tiger models page.
If I would get enough interest I would start posting up here again,http://www.rcuniverse.com/forum/atta...mentid=2156909http://www.rcuniverse.com/forum/atta...mentid=2156909
Cheers graham

http://www.rcuniverse.com/forum/atta...mentid=2156911hi l

Hey Graham,

Here is a copy of the post I did over at RCSB in my SiSt build.

It might help you for somewhere for reference.

EDIT: Hey Graham, didn't know your username here.... Awesome work as always. Wish I could get your metal paint over here...:D :D

Joe

I got these pics for my build and to help you guys so feel free to use them in your build threads and as needed to help you with your projects.

I got as much from the rear as I could. Poking the lens through the cracks in the fake concrete wall, lifting the camera on the tripod in mono-pod fashion like a news reporter, and asking 3 different docents if I could go behind the D9 to get shots. I was turned down very politely each time. So I got what I could get by shooting pictures through the neighboring displays. The tripod and a delayed shutter yeilded some prettygood results.

I got these pics for my build and to help you guys so feel free to use them in your build threads and as needed to help you with your projects.

I had to load the pics into 6 pages of Evernote files due to their size. If I work with them to organize or sort them you will always see the most current version of the files as Evernote sync's things right away and will keep everything current.

1 - https://www.evernote.com/shard/s167/...d6e1b0b3113c3b

2 - https://www.evernote.com/shard/s167/...3d6fec5a13a5c7

3 - https://www.evernote.com/shard/s167/...6f386c0253ed9f

4 - https://www.evernote.com/shard/s167/...35a5eb49b6c964

5 - https://www.evernote.com/shard/s167/...73bbee06cf9094

6 - https://www.evernote.com/shard/s167/...70e0b12ce0bd98



Hope these help you guys in your builds.


Joe


Link for video - https://youtu.be/S4X9kAUo5fQ


FW-190 D9 Walkaround Plus More Video - https://youtu.be/pbQVdx5PvOk

Just finished my Me 163 (Durafly) Small but oho!http://www.rcuniverse.com/forum/atta...mentid=2156917http://www.rcuniverse.com/forum/atta...mentid=2156918http://www.rcuniverse.com/forum/atta...mentid=2156919

Here's my Dave Platt Me109 before and after detailing.
http://www.rcuniverse.com/forum/atta...mentid=2157034http://www.rcuniverse.com/forum/atta...mentid=2157035

Hi Joe,
Many thanks for the links,, but for some reason I cant open them... would be good to see,,you can never have enough photo reference...
Yes thanks on the Chrome paint.. but yes the cost for shipping the paint is high, unless I can do a bulk shipment ..


Cheers Grahamhttp://www.rcuniverse.com/forum/atta...mentid=2157084

http://www.rcuniverse.com/forum/atta...mentid=2157135Here is a pic of my ESM 109 caught during takeoff at the annual Warbird meet here in Perth Western Australia.

Hey Graham,

Try the links now.... I think I got them. They may take a bit to load so do one page at a time. As long as the page starts to load give it a bit and refresh if it doesn't show up at first. Evernote can be cranky at times.

Once the page is open you can click on them and see them full sized.

Joe

Hi Joe,
Yes great got them to open,,
Many Thanks Graham

A couple from the dark side. Grumania Me 162 scale 1:4,8 with twin Wren 100 kero. FLies like a dream!


http://www.rcuniverse.com/forum/atta...mentid=2157344http://www.rcuniverse.com/forum/atta...mentid=2157345http://www.rcuniverse.com/forum/atta...mentid=2157346http://www.rcuniverse.com/forum/atta...mentid=2157347

Dave Platt 109G with twin Laser 160. All flaps are functional via arduino controller and only one cable into rx :-)

http://www.rcuniverse.com/forum/atta...mentid=2157350http://www.rcuniverse.com/forum/atta...mentid=2157351http://www.rcuniverse.com/forum/atta...mentid=2157352

SisT FW 190 A8, Saito FG 57 twin and Sierra retracts

http://www.rcuniverse.com/forum/atta...mentid=2157353http://www.rcuniverse.com/forum/atta...mentid=2157354

Anybody know, where was taken this shot?

I think might be the wright Patterson air museum in ohio

http://www.rcuniverse.com/forum/atta...mentid=2174644http://www.rcuniverse.com/forum/atta...mentid=2174645http://www.rcuniverse.com/forum/atta...mentid=2174646

Here are a couple of shots of my recently completed ESM Bf 109 made to resemble Erich Hartmann's plane on the eastern front. Lyle Vasser did Erich's face for me for the plane. He did a great job!

Some of my accessories for 1/5 scale Bf-109. More parts are comming soon.
https://cimg8.ibsrv.net/gimg/www.rcu...b64136852e.jpg
https://cimg9.ibsrv.net/gimg/www.rcu...99e10365af.jpg
https://cimg5.ibsrv.net/gimg/www.rcu...5e12545f1f.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...2944821983.jpg
https://cimg4.ibsrv.net/gimg/www.rcu...3f689744f0.jpg
https://cimg9.ibsrv.net/gimg/www.rcu...33138e5157.jpg
https://cimg0.ibsrv.net/gimg/www.rcu...14fe0afcea.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...11558b81b6.jpg
https://cimg2.ibsrv.net/gimg/www.rcu...8f2d2a0a67.jpg
https://cimg6.ibsrv.net/gimg/www.rcu...e3b4e1417c.jpg
https://cimg4.ibsrv.net/gimg/www.rcu...f101256938.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...5f472c0939.jpg
https://cimg2.ibsrv.net/gimg/www.rcu...d7c7893952.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...bf0cc5cbbf.jpg
https://cimg7.ibsrv.net/gimg/www.rcu...ccb1b76cda.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...b8ca0f1504.jpg

Nice