problem with my electronics?
#1
Banned
Thread Starter
Join Date: Dec 2010
Location: Downingtown,
PA
Posts: 3,488
Likes: 0
Received 0 Likes
on
0 Posts
problem with my electronics?
hey,
i moved the electronics (motor and esc) to my bandit from my twister. i didn't have the servo in, well i did for a little but took it out because it didn't work. anyway, NOTHING will work. i rebinded maybe 15 times, tried reprogramming, but the programming won't work, and have everything hooked up. what could be the problem? there is no throttle or anything.
i moved the electronics (motor and esc) to my bandit from my twister. i didn't have the servo in, well i did for a little but took it out because it didn't work. anyway, NOTHING will work. i rebinded maybe 15 times, tried reprogramming, but the programming won't work, and have everything hooked up. what could be the problem? there is no throttle or anything.
#2
RE: problem with my electronics?
after you rebinded the Rx to the Tx, does the LED on the Rx come on solid red?
make sure you have the ESC plugged into the Rx the correct way.
make sure the settings on your radio are as they should be when programming the ESC
make sure you have the ESC plugged into the Rx the correct way.
make sure the settings on your radio are as they should be when programming the ESC
#4
RE: problem with my electronics?
ORIGINAL: electricrc68
what do you mean by the settings on my radio being correct? the led on the Rx comes up solid blue.
what do you mean by the settings on my radio being correct? the led on the Rx comes up solid blue.
i know that some ESC's have to have the throttle trim set to 0, and the throttle reversing switch in a certain position(normal or reverse)
not true with all ESC's tho. and im not familliar enough with the twister's esc.
#6
RE: problem with my electronics?
ORIGINAL: electricrc68
okay thanks. could it have something to do with the servo?
okay thanks. could it have something to do with the servo?
#9
RE: problem with my electronics?
ORIGINAL: electricrc68
wait i got it to work. the esc was connected to the receiver wrong. stupid me! [:@]
wait i got it to work. the esc was connected to the receiver wrong. stupid me! [:@]
had a buddy do the same thing. tried everything and couldnt get the ESC to work. i took one look at it and saw the ESC plugged into the Rx wrong. its easy to spot that kinda mistake when you have done the same thing yourself