WIRELESS BINDING ?
#1
Member
Thread Starter
Join Date: Aug 2011
Location: , NC
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
WIRELESS BINDING ?
I did not get a cable to bind my remote with. Can someone tell me the proper procedure for wireless binding?
I see the button on the remote, and there is a teeny tiny one on the receiver, now what ?
I've looked on Youtube, but all I can find is wired binding, and the instruction manual is wired as well.
Thanks !
I see the button on the remote, and there is a teeny tiny one on the receiver, now what ?
I've looked on Youtube, but all I can find is wired binding, and the instruction manual is wired as well.
Thanks !
#2
RE: WIRELESS BINDING ?
i believe you need to power up the reciever with a 4-7v battery(plugged into the "batt" slot
then push the button on the Reciever
next, hold down the button on the radio while turning it on.
that should bind the reciever to the radio.
Im kinda guessing, but the only difference between the 2 recievers is that one needs a bind plug and the other has the button. so, the process should be the same, just have the button on the reciever set instead of having a bind plug in.
then push the button on the Reciever
next, hold down the button on the radio while turning it on.
that should bind the reciever to the radio.
Im kinda guessing, but the only difference between the 2 recievers is that one needs a bind plug and the other has the button. so, the process should be the same, just have the button on the reciever set instead of having a bind plug in.
#5
RE: WIRELESS BINDING ?
ORIGINAL: rootbeerslop
Dang, a 4 - 7v battery? All I got is the AA's that go in it.
Why can't things just ''work?''
Dang, a 4 - 7v battery? All I got is the AA's that go in it.
Why can't things just ''work?''
you can use a 4 "AA" battery holder with a reciever plug, or a 2s lipo with a reciever plug.
if you model is nitro, you can just plug in the reciever pack(whether its a "AA" pack or a nimh pack)
if its an electric model, you will need a battery pack or "AA" holder with a reciever plug
#6
Senior Member
Join Date: May 2011
Location: cicero,
IL
Posts: 716
Likes: 0
Received 0 Likes
on
0 Posts
RE: WIRELESS BINDING ?
just plug ur esc recievr lead in2 da bind port on ur reciever & turn da esc on wit da battery attachd.. ur esc puts out da correct voltage needid.
den aftr its binded turn da esc off, plug bak in2 channel 2, & power on
den aftr its binded turn da esc off, plug bak in2 channel 2, & power on