Brake disk
#1
Junior Member
Thread Starter
Join Date: May 2011
Location: warner robins, GA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Brake disk
on my shockwave i noticed my brake disk is hanging on. it not set in the brake shoes. i can't seen to get it back in the way it need to be.
What i need to do to get it set right?
What i need to do to get it set right?
#7
RE: Brake disk
the disc is wallowed out. it's not tight on the flat part of the drive cup. You probably had a loose shoe which let the disc flop around causing it to open up the hole which was originally flat on two sides and round on the other two. Now it's rounded all the way around and loose. Easy fix. Buy a new disc and replace the worn one. Tighten up the shoes until they just barely touch the disc. This will keep it from moving in and out.
#8
Senior Member
RE: Brake disk
ORIGINAL: Dads like rc too
the disc is wallowed out. it's not tight on the flat part of the drive cup. You probably had a loose shoe which let the disc flop around causing it to open up the hole which was originally flat on two sides and round on the other two. Now it's rounded all the way around and loose. Easy fix. Buy a new disc and replace the worn one. Tighten up the shoes until they just barely touch the disc. This will keep it from moving in and out.
the disc is wallowed out. it's not tight on the flat part of the drive cup. You probably had a loose shoe which let the disc flop around causing it to open up the hole which was originally flat on two sides and round on the other two. Now it's rounded all the way around and loose. Easy fix. Buy a new disc and replace the worn one. Tighten up the shoes until they just barely touch the disc. This will keep it from moving in and out.
Good call dad great eye how could I not see the big hole were the brakes have rounded out? Yes new brak pads as dad says easy fix.