Shredder SCB Bolt Replacement
#1
Junior Member
Thread Starter
Join Date: Mar 2012
Location: , NH
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Shredder SCB Bolt Replacement
I was doing a run with my new Shredder SCB when the steering suddenly went haywire. Upon closer inspection, I found out that I had lost a critical bolt in the front wheel assembly, the one which attaches it to the arm.
I went to my local hobby shop but they don't do Redcat (I ordered this truck online) and they said the biggest bolt they had was 3M size and this one appears to be 4M size.
I went to the user manual but even in the exploded view I could not find this bolt in the diagram so that I could order another one. Does anyone have the part number for this?Does anyone know where I could get another one?
Pictures attached to show the empty bolt hole, and the extant bolt in the other wheel.
I went to my local hobby shop but they don't do Redcat (I ordered this truck online) and they said the biggest bolt they had was 3M size and this one appears to be 4M size.
I went to the user manual but even in the exploded view I could not find this bolt in the diagram so that I could order another one. Does anyone have the part number for this?Does anyone know where I could get another one?
Pictures attached to show the empty bolt hole, and the extant bolt in the other wheel.
#2
Junior Member
Join Date: Oct 2011
Location: Muscatine,
IA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: Shredder SCB Bolt Replacement
BS903-017N Left/Right C-Carrier w/Screws
Above is the part number for the hub carrier upgrade that includes the 4mm screws your looking for. Price is only $2.89 thru rufaster.com.
#3
RE: Shredder SCB Bolt Replacement
I would definately buy the upgraded aluminum steering knuckles. I the same problem with my son's Caldera 10e and my HPI MT2. Those knuckles have a lot of stress on them, the only thing holding them in place is the lower and upper screw that goes into plastic. When you replace them with the aluminum one's, you can tighten down on the holding screws. It should be the last time you replace them except for bad bashing.
#4
Senior Member
My Feedback: (1)
Join Date: May 2011
Location: Palo,
IA
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
RE: Shredder SCB Bolt Replacement
Or just pick a bunch up from a hardware store. I've been losing those same screws in both my Backdraft and Lightning, with both plastic and aluminum c-carriers.
#5
Senior Member
Join Date: Feb 2003
Location: hall of fame city,
OH
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
RE: Shredder SCB Bolt Replacement
ORIGINAL: Dads like rc too
I would definately buy the upgraded aluminum steering knuckles. I the same problem with my son's Caldera 10e and my HPI MT2. Those knuckles have a lot of stress on them, the only thing holding them in place is the lower and upper screw that goes into plastic. When you replace them with the aluminum one's, you can tighten down on the holding screws. It should be the last time you replace them except for bad bashing.
I would definately buy the upgraded aluminum steering knuckles. I the same problem with my son's Caldera 10e and my HPI MT2. Those knuckles have a lot of stress on them, the only thing holding them in place is the lower and upper screw that goes into plastic. When you replace them with the aluminum one's, you can tighten down on the holding screws. It should be the last time you replace them except for bad bashing.
What upgraded steering knuckle? Can you please provide a part number for that.So your saying the steering knuckles and c hubs from a caldera will fit on the shredder?..Mine were junk right out of the box which was very anoying.
#6
RE: Shredder SCB Bolt Replacement
ORIGINAL: CHEVY 2
What upgraded steering knuckle? Can you please provide a part number for that.So your saying the steering knuckles and c hubs from a caldera will fit on the shredder?..Mine were junk right out of the box which was very anoying.
What upgraded steering knuckle? Can you please provide a part number for that.So your saying the steering knuckles and c hubs from a caldera will fit on the shredder?..Mine were junk right out of the box which was very anoying.
http://www.redcatracing.com/BS903-111