Help Identifying a Volcano S30 Part
#1
Thread Starter
Join Date: Jun 2011
Location: , TX
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Help Identifying a Volcano S30 Part
I need the part on the volcano s30 that control the steering it has a screw that comes up through the bottom of the chasis. I accidently tightened this screw too much and it stripped, so I need to replace the part but, I'm looking at the schematics view at redcat and I see two similar parts and can't figure out which one I need. I took a pic of the part on my volcano, this is what I need:
https://dl.dropbox.com/u/38834766/20...2010.27.34.jpg
At redcat's site these are the two parts I found that look similar to it:
http://www.redcatracing.com/02025
http://www.redcatracing.com/02075
which one is the correct part?
thanks
https://dl.dropbox.com/u/38834766/20...2010.27.34.jpg
At redcat's site these are the two parts I found that look similar to it:
http://www.redcatracing.com/02025
http://www.redcatracing.com/02075
which one is the correct part?
thanks
#2
Member
Join Date: Apr 2010
Location: Phoenix,
AZ
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help Identifying a Volcano S30 Part
The correct one you need is part number 02025. You have pictured the servo saver that has the 2 arms coming off, the other side just has the one arm.