Stock needle settings for Tornado Engine
#2
Member
Join Date: Jun 2012
Location: Kylertown, PA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: Stock needle settings for Tornado Engine
The stock needle settings are 2.5-3 turns out from fully closed on the high and low speed needles. the idle screw should be set so the carb is open about 1mm. Hope this helps
#3
RE: Stock needle settings for Tornado Engine
ORIGINAL: micah11
The stock needle settings are2.5-3 turns out from fully closed on the high and low speed needles. the idle screw should be set so the carb is open about 1mm. Hope this helps
The stock needle settings are2.5-3 turns out from fully closed on the high and low speed needles. the idle screw should be set so the carb is open about 1mm. Hope this helps