S30 volcano nitro rc truck will not stay running.
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Westville, NS, CANADA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
S30 volcano nitro rc truck will not stay running.
Hey guys,
I just got a new S30 volcano nitro rc truck and itwill not stay running. when I plug the exhaust and try priming, nothing happens but yet when i remove the fuel line from the exhaust and blow thru the fuel llne the fuel starts to move towards the carb. Would this be due to an air leak some where? Also can someone pleae provide me with the factory settings or settingsfor the HSNand LSN, so I can atleast get the truck running. I am going to check for air leaks, Thanks...
Mike
I just got a new S30 volcano nitro rc truck and itwill not stay running. when I plug the exhaust and try priming, nothing happens but yet when i remove the fuel line from the exhaust and blow thru the fuel llne the fuel starts to move towards the carb. Would this be due to an air leak some where? Also can someone pleae provide me with the factory settings or settingsfor the HSNand LSN, so I can atleast get the truck running. I am going to check for air leaks, Thanks...
Mike
#2
RE: S30 volcano nitro rc truck will not stay running.
ORIGINAL: michsmit
Hey guys,
I just got a new S30 volcano nitro rc truck and it will not stay running. when I plug the exhaust and try priming, nothing happens but yet when i remove the fuel line from the exhaust and blow thru the fuel llne the fuel starts to move towards the carb. Would this be due to an air leak some where? Also can someone pleae provide me with the factory settings or settings for the HSN and LSN, so I can atleast get the truck running. I am going to check for air leaks, Thanks...
Mike
Hey guys,
I just got a new S30 volcano nitro rc truck and it will not stay running. when I plug the exhaust and try priming, nothing happens but yet when i remove the fuel line from the exhaust and blow thru the fuel llne the fuel starts to move towards the carb. Would this be due to an air leak some where? Also can someone pleae provide me with the factory settings or settings for the HSN and LSN, so I can atleast get the truck running. I am going to check for air leaks, Thanks...
Mike
#3
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Westville, NS, CANADA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: S30 volcano nitro rc truck will not stay running.
Yes it will start for 2-3 seconds, but only when i put nitro down into the carb, I think it is just burning the fuel in the carb..
#4
RE: S30 volcano nitro rc truck will not stay running.
ORIGINAL: michsmit
Yes it will start for 2-3 seconds, but only when i put nitro down into the carb, I think it is just burning the fuel in the carb..
Yes it will start for 2-3 seconds, but only when i put nitro down into the carb, I think it is just burning the fuel in the carb..
#6
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Westville, NS, CANADA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: S30 volcano nitro rc truck will not stay running.
Wow that really worked. Thank you so much. When it started my wheels where turning a bit does that mean my idel is set too high? Also Ipinched the fuel line going to the carb to stop the engine until I can break it in. It is getting late here and its -24 outside, do you think it will be ok to run the break-n in a couple days when it warms up?
Thanks again you made my day!!!!!!!
Mike.
Thanks again you made my day!!!!!!!
Mike.
#7
RE: S30 volcano nitro rc truck will not stay running.
ORIGINAL: michsmit
Wow that really worked. Thank you so much. When it started my wheels where turning a bit does that mean my idel is set too high? Also I pinched the fuel line going to the carb to stop the engine until I can break it in. It is getting late here and its -24 outside, do you think it will be ok to run the break-n in a couple days when it warms up?
Thanks again you made my day!!!!!!!
Mike.
Wow that really worked. Thank you so much. When it started my wheels where turning a bit does that mean my idel is set too high? Also I pinched the fuel line going to the carb to stop the engine until I can break it in. It is getting late here and its -24 outside, do you think it will be ok to run the break-n in a couple days when it warms up?
Thanks again you made my day!!!!!!!
Mike.
#8
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Westville, NS, CANADA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: S30 volcano nitro rc truck will not stay running.
Ok, good to no. I started it in the house tonight. Iwill wait until its close to 50 out before I break it in. Again thank you for your help.