Grimm262

We are breaking in the car and after one run the steering stopped working. The wheels will turn slightly to the left or right if we use the trim controls on the receiver but the steering wheel no longer turns the wheels. Any suggestions on what we should look at?

Edit - figured it out - there are two trims for steering on the controller. One to make it straight and the second to control how far it turns. We had the second one trimmed all the way down to no movement. Once we trimmed back to zero it works fine.

Redcat James

1 knob is for steering trim and the other for steering dual rate. The dual rate knob should be set to 6 and the trim knob should be set so that the vehicle tracks straight.