If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Results 1 to 2 of 2

  1. #1

    Problem With Electrical Components of Shockwave

    I'm having a problem with the electrical parts of my shockwave nitro buggy. I've checked all the batteries and all are fully charged but when I flip the on switch nothing turns on. The servos don't move at all, they don,t respond to the controller, and its as if there is no power going through. The servos are plugged into the correct port. I need to know if either the switch is bad, or the receiver. Thank You for your help.
    Last edited by rcdude1-1; 05-18-2014 at 12:49 PM.

  2. #2
    Check the voltage coming out of the battery holder and make sure it's plugged in correctly. If it was plugged in backwards, you could have damaged the receiver.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
RCU Reviews
All times are GMT -8. The time now is 07:47 AM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.