"OFFICIAL"Redcat Racing TRUCK thread
#351
Junior Member
Join Date: Jan 2006
Location: Tempe,
AZ
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
I know this is the truck thread but i thought i would share this with you guys. well i went out into my parking lot to run my lighting vx and i ran about 6 tanks jump the curb into a nice grassy/dirt field area last jump i went pretty fast and my lighting bottom out and sent it flyin about 5 feet high and tumbling too only broke the steering arm good thing i already ordered a new set lol . im gonna convert my lighting to a buggy cool huh just thought id share
#352
Member
Join Date: Jan 2006
Location: , WA
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
Its weird some of us can go over a curb but some go over a rock in the road and are wole truck breaks it's all a matter of opioion some like recat trucks some don't i like my truck it's in picies and not in working order but again some are luckyier than others i want to know how warm it is where you ran your truck
#353
Member
Join Date: Jan 2006
Location: Trussville, AL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
levid -- what is the weather like in Wa. this time of year?
We are in Alabama and have had ZERO parts breakages, except the body.
We are in Alabama and have had ZERO parts breakages, except the body.
#356
Member
Join Date: Jan 2006
Location: Newcastle, AUSTRALIA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
he means 35-45 degrees celcius, not farhenheit.
I have had no breakages at all yet going on a bit over 2 weeks of daily use, and the temp is usually between 20-40 deg. cel. My trucks holding up well, its been through a puddle, rolled quite a few times on tarmac going very fast and the only damage is a few scratches on the shell and a few on the chassis.
I have had no breakages at all yet going on a bit over 2 weeks of daily use, and the temp is usually between 20-40 deg. cel. My trucks holding up well, its been through a puddle, rolled quite a few times on tarmac going very fast and the only damage is a few scratches on the shell and a few on the chassis.
#357
Member
Join Date: Jan 2006
Location: Trussville, AL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ORIGINAL: wildwilly
he means 35-45 degrees celcius, not farhenheit.
I have had no breakages at all yet going on a bit over 2 weeks of daily use, and the temp is usually between 20-40 deg. cel. My trucks holding up well, its been through a puddle, rolled quite a few times on tarmac going very fast and the only damage is a few scratches on the shell and a few on the chassis.
he means 35-45 degrees celcius, not farhenheit.
I have had no breakages at all yet going on a bit over 2 weeks of daily use, and the temp is usually between 20-40 deg. cel. My trucks holding up well, its been through a puddle, rolled quite a few times on tarmac going very fast and the only damage is a few scratches on the shell and a few on the chassis.
I did not take it that way. I would imagine he means Fahrenheit seeing as he is in Washington State and here in the US we still use Fahrenheit for temps.
I am glad to hear that you are having good luck with your truck as well!
#358
Member
Join Date: Jan 2006
Location: , WA
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
YA SOME OF US AREN'T SO FORTUNELY GOOD ENOUGH TO LIVE WHERE THERE'S NICE WEATHER ALL DAY BUT DON'T MATTER IT'S STILL COLD IN WASHINGTON STATE EITHER WAY YOU LOOK AT IT
#360
Banned
My Feedback: (14)
Join Date: May 2004
Location: chicago,
IL
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
Here yah go.. email for any details and can get all parts.. For cheap thanks. http://www.rcuniverse.com/market/ite...807&electric=0
#361
Member
Join Date: Jan 2006
Location: Newcastle, AUSTRALIA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ORIGINAL: ScottHarp
I did not take it that way. I would imagine he means Fahrenheit seeing as he is in Washington State and here in the US we still use Fahrenheit for temps.
I am glad to hear that you are having good luck with your truck as well!
I did not take it that way. I would imagine he means Fahrenheit seeing as he is in Washington State and here in the US we still use Fahrenheit for temps.
I am glad to hear that you are having good luck with your truck as well!
edit: BTW does anyone know how much power the .18 engine in these make, or any other specs of the engine? eg rpm?
#362
Junior Member
Join Date: Jan 2006
Location: Little Elm,
TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
Hey everyone I am new to rc world and very new to posts. I have a himoto 1/10 truck with a .18 engine i have been reading the post and it has been very helpful my question is i have run about 5 tanks of gas threw my truck it runs pretty good until i go full throttle when i do that the engine dies. i have tried adjusting both needle and low speed adjustments. Right now i can run slow speed and mid throttle, but as soon as i go to full throttle it runs for just a second then dies. like I said before very new to this stuff so any help will be appreciated.
#363
Junior Member
Join Date: Jan 2006
Location: Hutchinson,
MN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
well i have been running my redcat the last few days and the warmest it got was 30 f and stuck it in the snow banks many times buried it completly 2-3 times only thing that broke and i dont know if it is a problem i could even blame on the car was going full blast down the street for around 50 yds turned a little to late caught the snowbank hit hard onto ice and broke a a arm and a shock cracked open read many places all have broken a arms i think i just caught it right all on the one tire and snap all done for the day need ally arms broke at the pin where it is its weakest
#364
Senior Member
Join Date: Jan 2006
Location: San Antonio,
TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
Hey guys!!!!
I got my tuned pipe!! It is the best mod yet!!!!!! One hell of a exhaust note and power gain on mid to high speed. The truck difenately loves the addition.
temp in Texas is about 65 F low, 83 F high right now (day time + during bashing time)
Scott---I'm always haven' fun with my truck even when I ( me being too cocky-- I can take that curb going 30+) break it and have to fix it, it's all in good fun.
I remember someone saying "this hobby is about mistakes and failures, you can't improve without breaking everything and making it better."
In my own words---- run it hard till it breaks and tear it down--fix it--run it hard again!!!
I got my tuned pipe!! It is the best mod yet!!!!!! One hell of a exhaust note and power gain on mid to high speed. The truck difenately loves the addition.
temp in Texas is about 65 F low, 83 F high right now (day time + during bashing time)
Scott---I'm always haven' fun with my truck even when I ( me being too cocky-- I can take that curb going 30+) break it and have to fix it, it's all in good fun.
I remember someone saying "this hobby is about mistakes and failures, you can't improve without breaking everything and making it better."
In my own words---- run it hard till it breaks and tear it down--fix it--run it hard again!!!
#365
Senior Member
Join Date: Jan 2006
Location: San Antonio,
TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
I should be able to post some pics in the next couple fo days of the mods I've done.
Chubbysdad----Run out and get the Tsias pipe----E1018K--(www.RCHub.com , is the internet sales site) It gives the truck one heck of a mean tuned exhaust note!!!!!!
The install was cumbersume being my first nitro rc, but it will work. The manifold matches up nicely, and the kit comes with new hardware to hold the pipe in place. At the tip of the pipe is a metal retension rod that bolts to the frame plate with a screw and nut, this rod in the new kit needs to be bent into a angle ( comes staight) to hold the pipe at the right level ( for ground clearence).
Other than that it was pretty straight forward, although there was no instructions with the kit ( I had to wing it--but it still only took about 30-45 min to install---thats me learning as I go!)
Oh-yeah wicked polished finish, it dressed up the truck nicely.
levid---trust me I miss the snow I used to live in Germany---it shure as heck doesn't snow here ( it's more like freezing rain for about 2 hours and then its all gone.
Chubbysdad----Run out and get the Tsias pipe----E1018K--(www.RCHub.com , is the internet sales site) It gives the truck one heck of a mean tuned exhaust note!!!!!!
The install was cumbersume being my first nitro rc, but it will work. The manifold matches up nicely, and the kit comes with new hardware to hold the pipe in place. At the tip of the pipe is a metal retension rod that bolts to the frame plate with a screw and nut, this rod in the new kit needs to be bent into a angle ( comes staight) to hold the pipe at the right level ( for ground clearence).
Other than that it was pretty straight forward, although there was no instructions with the kit ( I had to wing it--but it still only took about 30-45 min to install---thats me learning as I go!)
Oh-yeah wicked polished finish, it dressed up the truck nicely.
levid---trust me I miss the snow I used to live in Germany---it shure as heck doesn't snow here ( it's more like freezing rain for about 2 hours and then its all gone.
#366
Senior Member
Join Date: Jan 2006
Location: San Antonio,
TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
if your looking for wheels and tires and don't want to a mess with the glue--check this out http://www.maximizerproducts.com/Wheels.html
I thinking about investing in some of these wheels, reuseable and can change tire combos fairly quickly
I thinking about investing in some of these wheels, reuseable and can change tire combos fairly quickly
#367
Senior Member
Join Date: Jan 2006
Location: San Antonio,
TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
here is the pics of the new pipe and trimed body (yellow) and untrimed body (blue)
on the stock body I found that duck tapeing the body mount holes and punching them out drasticly prolongs body life this is my 2nd stock body, they look cool, but don't last. The yellow and blue bodies are for the traaxas nitro rustler , all of the mounting holes did not match up so I had to make my own. I also have a body for the traaxas stampede, but have not trimed it to fit the volcano yet.
on the stock body I found that duck tapeing the body mount holes and punching them out drasticly prolongs body life this is my 2nd stock body, they look cool, but don't last. The yellow and blue bodies are for the traaxas nitro rustler , all of the mounting holes did not match up so I had to make my own. I also have a body for the traaxas stampede, but have not trimed it to fit the volcano yet.
#368
Senior Member
My Feedback: (1)
Join Date: Jun 2005
Location: Clermont, FL
Posts: 2,824
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
Looks great Jcam. HOw is the sound? that much better. I didn't see that much of a difference with the traxxis pipe either with sound or performance.
#369
Senior Member
Join Date: Jan 2006
Location: San Antonio,
TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
It sounds more high pitched--wind up of rpms-- it really makes you want to romp the on the gas. I looked at the Traaxas pipe and thought this one looked better, and RC Car Action mag said some good things about the Tsias sets so I took a swing at the $55.00 set(with all mounting hardwhare and manifold & manifold gasket),
plus I liked the chrome/ polished finish more than the blue on the Traaxas set.
plus I liked the chrome/ polished finish more than the blue on the Traaxas set.
#370
Senior Member
Join Date: Jan 2006
Location: San Antonio,
TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
It almost sounded like a Savage 25 with the star motor and aftermarket pipe I saw last week at my lhs--mine sounds a little weaker than the big block Savage but it is close!!!!
#372
Junior Member
Join Date: Jan 2006
Location: , CA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
I got the 1/8 buggy and the 1/8 truck. The truck center diff is locked up front to rear with no adjustment. The buggy has a set screw that allows me to choose between locked up and slippin between front and rear. Can anyone tell me about this? Name for center diff locked up without adjustment? Name for center diff with adustment screw? Slipper vs. ?