Tornado XP problem
02-27-2006, 11:44 AM
#2
Senior Member
Join Date: Jan 2006
Location: York,
NE
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tornado XP problem
If it is moving while idling and dies when braking you have your throttle trim set to high and/or the idle speed screw set too low...
Set the throttle servo to it's "neutral" centered position...leave your controls ON and look down the throat of the carb...you should have about a 1/16th gap if the idle speed setting if correct....hit the brake and see if that gap closes up more...if so...you need to adjust you throttle linkage or servo position and the idle speed screw.
Set the throttle servo to it's "neutral" centered position...leave your controls ON and look down the throat of the carb...you should have about a 1/16th gap if the idle speed setting if correct....hit the brake and see if that gap closes up more...if so...you need to adjust you throttle linkage or servo position and the idle speed screw.
