motor parts for redcat needed
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: rincon,
GA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
motor parts for redcat needed
HEY, DOES ANYONE KNOW WHERE TO BUY PARTS FOR THE .16 AND .18 MOTORS. I NEED A BACK PLATE, THROTTLE LEVER ON THE CARB,REBUILD PARTS ETC. I CANT SEE BUYING A WHOLE MOTOR WHEN THEY CAN BE REPAIRED. THANKS, TOM
#2
Junior Member
Join Date: Apr 2006
Location: portsmouth, VA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
RE: motor parts for redcat needed
i imagine bu the time you will find parts and go throu the hassle of fixing the motor it will be just as quick to get a new one
#3
Member
Join Date: Mar 2006
Location: Tekamah, NE
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
RE: motor parts for redcat needed
But they whole motor is only like 85 or so dollars I dont think you could get parts for any cheaper than that. have you checked out www.clermontmotorsports.com if you can get parts for them he would have them and his service is awsome.
#4
Senior Member
Join Date: Mar 2006
Location: Tallahassee, FL
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
RE: motor parts for redcat needed
Hey man I'm in the same boat, getting parts for these motors is pretty much impossible. If you do find them they're probably too costly to be reasonable. That isn't redcat specific either, for the most part finding cheap parts for any nitro motor is a lost cause.
#5
Junior Member
Thread Starter
Join Date: Mar 2006
Location: rincon,
GA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: motor parts for redcat needed
all i need is the throttle lever for one motor and a back plate for the other. both motors have only a few hours on them. i cant even find the name brand of these motors. or parts that will interchange
#7
RE: motor parts for redcat needed
You might be able to find parts if its a Japanese Team Infinity (says on crankcase) but I wouldnt bet on it,if its one of the Taiwanese (vertex/vx) engines you can forget about it.
#8
Junior Member
Thread Starter
Join Date: Mar 2006
Location: rincon,
GA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: motor parts for redcat needed
WOULDN'T YOU NO IT, THE BLOCK HAS VX-16, SO I GUESS THERE DISPOSABLE. ANYONE GOT ANY OLD ONES THEY WANT TO GET RID OFF LET ME KNOW THESE I GOT ARE BRAND NEW . THANKS TOM
#11
RE: motor parts for redcat needed
Yeah you can fit pretty much any .12-.15-.18 out there provided it has a standard threaded crankshaft. A decent O.S will run ya only a few bucks more with more readily available parts...