hawk900

( redcats and other rides ) Heres my new toy.I got this Savage X SS 3 speed 4.6 (RTR) and many spare parts off Ebay for $415.00 shipped

So Wade ill be needing a STS 30 motor and parts soon, and some Redcat parts . LOL ( Heres some pics. of my Ebay deal )

AllAboutFunHobbies

Here's the motor you need for that bad boy, you best be getting a WAYYYY better wheely bar for this bad boy.
[link=http://allaboutfunhobbies.com/store/catalog/product_info.php?cPath=23_27&products_id=610]http://allaboutfunhobbies.com/store/catalog/product_info.php?cPath=23_27&products_id=610[/link]

leemunger

how do you clean them up after you get them so muddy

ehroof

denatured alchahol, carb cleaner, tooth brush, air compressor. spray car down with denatured alcahol then blow off with compressed air, usually does the trick, i clean the engines with carb cleaner in the can and blow it off too, usually spray with silicone spray when finished

AllAboutFunHobbies

I just pull the engine, and electronics, spray the whole thing down with Simple Green let it soak spray the whole thing again and run it under the bathtub faucet on full blast comes spotless clean again. Do the same thing as Ehroof when it comes to the engine, that works realy good, or Engine degreaser when the enigine is warm (works better).

rclynx

see I get help on those tough words too..............alcohol...........the only reason I know how to spell that is because I drank so much of it when I was a younger.[sm=bananahead.gif]

ehroof

lol, its a hard word to spell right!!!

rclynx

Yea its sure is.........................just having fun, no fights here I screw up all the time. Thats just like trying to translate the work I do on RC's to the forums, I can look at a problem and take care of it but I loose it trying to write it out[:@] Time to open shop and do some cement trials with some new things on the Tsunami. I promise some pick's in the next few weeks.....................almost ready for production sales [:-]

ehroof

nice, post some pictures

quadzilla122

hey look at my atv i lost the side picture i dont know how?Look at it in my profile.

bamutt03

just got new tires , pipe, bearings and axles almost ready to run now!

AllAboutFunHobbies

Where did you get the Red upper plate from? Looks good.

daveschutt

Hey spartan8892, sorry it took me so long to reply here is the link for the proline dirt hawg 2.2[link]http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDU13&P=ML[/link][link]http://www.amainhobbies.com/product_info.php/manufacturers_id/12/products_id/5511[/link]

Chubbysdad

My Feedback: (1)

Here are a few pics of my sons earthquake. Take in mind, he is only 6 so it is nothing special. lol I just blended the colors he picked.

allenthen831

that is nice dennis love it damn those rims and the body match perfectly

allenthen831

well went to the hobby store today to pick up some foam tires for my hpi rs4 and here are some pictures getting ready to go to the track very soon with ed tell me what you guys think paid 24 bucks for 4 good price because on towers their 20 bucks for only 2 they are jaco foam tires hope you like

ehroof

nice allen, we have to go to the track soon!!!!!

bluecaka69

here one of my other rides with a new shell

skrotch

Where did you get that Hooters body? That didn't sound right!! Anyway, that has to be the best body I have seen so far. This is getting a little awkward! Nice Truck!

bluecaka69

its all custom I did everything from the hooters writing to the hooters playing cards on the back

AllAboutFunHobbies

Blue does awsome work, check out some of the other stuff he's done.

[link=http://allaboutfunhobbies.com/store/catalog/index.php?cPath=1_113]http://allaboutfunhobbies.com/store/catalog/index.php?cPath=1_113[/link]


F.Y.I. Blue, be watching out in the mail next week for the paint kits and the bodies.

123michael

oww my godd allen you have done a load to your nitro car since i last saw it allen can you start to pm me again you are so cool m8 its so so god what you have done to it...

blue you are the best man i dident evan know you did bodies like that for the volcano cool man i might buy one!!!

oh sorry guys i have gone a little quit on the forum lately sorry about this ok im back now im on msn all the time i just cant come off the dam thing ok but over here on the forum its gone all quiet why is this??it may just be because were in summer again.oh by the way if you have msn and you want to add me here is my add on
[email protected] thats it mate just add me on msn i will be on normaly but as your in america i may be asleep in night but im off school for like 6 weeks...cool eh id like do do some caching up with you guys on here so if you want just add me on msn.

so ehroof you got eny new toys lately??im getting bored now because im off school and im hardely on the forum now because im off school and i just go on msn all the time talking to my girl friend.so eddie what have you been up to?

DRIFT!!!
ive been thinking i may get a drift car as i realy love tokyo drift and iu was wondring could i drift so ill do a video when i get the car all done and the body all might get a nitro on road car but i love drift at the moment but i wanna drift with elecric as they are steadyer than nitro and drift more fore sum sort of reason so i have been in the drift forum quite a bit reciently.oh and by the way i want a tc4 team acocated to drift with and some hot motors and that ah and a bashable drift body.lolwith a cool drift body as well so i can have the best look ever with rc cars and it will look sweet

WHAT HAPPEND TO MY REDCAT??
well my redcat is dumped on my desk and well berleave me or not but im getting a new engiene the vertex 18 i am olso getting a new pipe new body new shell new heat sink and then i will bet all set for the track and i will be on my way to it.the os 18 cvr is still stood with all the pipe on on my table top laying there to be started again but i just dont know what got wrong with it i am not good with engienes but the schumacher engiene works like a dream and is cool because it is a 21 engiene.so thr redcat it has no engiene in it or pipe they have been taken out i have put them to one side and said right i want a nice look on my car so im getting all sorts[][][>:][>:][>:]i am determande to do this and fight the war.[>:]

THEY ARE ALL BROKEN!!!
its true i have three nitro cars and thay are all broken and that right i have explaind what happed to redcat now the schumacher menace why i dont know dont ask the model shop doesent evan know so im not sure but they said the steering servo pin was broken and they said it was bent nd yep it was bent and thair for i got a new one and then that ended up not working evan tho it was streight but it wasnt my servos or nothing it was the servo saver i just cant see what i amn doing wrong tho you try and turn the weels and it wont turn it justs goes streight on to the servo saver some how and the stering does feel stiff i i just dont know why so i am going to take it to the model shop somtime to be fixed and get that up and running again.the road car then thair is not mutch to say about that really its just dam good.i love on road now because of this one.so the on roat is pritty dam cool but the rear diff is slipping could enyone know what the problem is???[][][]

right nah i have blabred on a a bit nah so thair that has what is happerning and wha i am doing now.....

Chubbysdad

My Feedback: (1)

Nice job blue your the man....

bluecaka69

AND ANOTHER ONE

123michael

oh my god your rides just get better and better i have to visit your house when i come overlol