will these all work
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Denver,
CO
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
will these all work
I had gotten these links in an other forum, and I wanted to know if all these parts will work with the bb transmission(2-speed)
http://www2.towerhobbies.com/cgi-bin...&I=LXSP08&P=ML
http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR2&P=K
http://www2.towerhobbies.com/cgi-bin...4&I=LXDHM0&P=K
http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR9&P=K
I dont want to order them if they dont work. I have heard stuff about a single speed and I dont want a sinlge speed, I want the 2-speed, so do these work???thanks
http://www2.towerhobbies.com/cgi-bin...&I=LXSP08&P=ML
http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR2&P=K
http://www2.towerhobbies.com/cgi-bin...4&I=LXDHM0&P=K
http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR9&P=K
I dont want to order them if they dont work. I have heard stuff about a single speed and I dont want a sinlge speed, I want the 2-speed, so do these work???thanks
#2
RE: will these all work
here the one ehroof posted earlier these all work
I figured since alot of people have been asking about the upgraded clutch bell and spring i would make a post just about that.
Hpi 2 speed clutch bell for tornado xp and other 2 speeds
hpi #83069: http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR2&P=K
hpi #76977: http://www2.towerhobbies.com/cgi-bin...4&I=LXDHM0&P=K
hpi #76982: http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR9&P=K
Hpi single speed clutch bell for volcano stx and other single speeds
hpi #77107: http://www2.towerhobbies.com/cgi-bin...?&I=LXLST9&P=7 (you can use more or less teeth, less teeth better acceleration, more teeth has more top end and faster)
clutch springs
traxxas #4146: http://www2.towerhobbies.com/cgi-bin...46&FVPROFIL=++ (regular)
traxxas #4146x: http://www2.towerhobbies.com/cgi-bin...=++&search3=Go (high stall, more rpm's before engaging the clutch)
Only use the springs with the traxxas setup the clutch shoes wont work
mpi #3072: http://www2.towerhobbies.com/cgi-bin...?&I=LXUR89&P=7
cheaper alternative
volcano single speed spur gear: #8033
Hope this helps some of you's out, i have personally used the hpi cluch bells and the traxxas 4146x spring and i am very happy with them both, the cluch bells will eliminate your problems with stripping gears so i would suggest you do it.
I figured since alot of people have been asking about the upgraded clutch bell and spring i would make a post just about that.
Hpi 2 speed clutch bell for tornado xp and other 2 speeds
hpi #83069: http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR2&P=K
hpi #76977: http://www2.towerhobbies.com/cgi-bin...4&I=LXDHM0&P=K
hpi #76982: http://www2.towerhobbies.com/cgi-bin...4&I=LXCLR9&P=K
Hpi single speed clutch bell for volcano stx and other single speeds
hpi #77107: http://www2.towerhobbies.com/cgi-bin...?&I=LXLST9&P=7 (you can use more or less teeth, less teeth better acceleration, more teeth has more top end and faster)
clutch springs
traxxas #4146: http://www2.towerhobbies.com/cgi-bin...46&FVPROFIL=++ (regular)
traxxas #4146x: http://www2.towerhobbies.com/cgi-bin...=++&search3=Go (high stall, more rpm's before engaging the clutch)
Only use the springs with the traxxas setup the clutch shoes wont work
mpi #3072: http://www2.towerhobbies.com/cgi-bin...?&I=LXUR89&P=7
cheaper alternative
volcano single speed spur gear: #8033
Hope this helps some of you's out, i have personally used the hpi cluch bells and the traxxas 4146x spring and i am very happy with them both, the cluch bells will eliminate your problems with stripping gears so i would suggest you do it.
#3
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Denver,
CO
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
RE: will these all work
isnt the stock tooth for the tornado 16 tooth? I was looking into buying a big shipment of new trans parts from towwerhobies and I found a 15 tooth clutch bell...heres the link
http://www2.towerhobbies.com/cgi-bin...?&I=LXD210&P=M
will these work and what will be the performance change? If you guys have anything better that you might fingd on towwer, please let me know.thanks. and smile and be happy
http://www2.towerhobbies.com/cgi-bin...?&I=LXD210&P=M
will these work and what will be the performance change? If you guys have anything better that you might fingd on towwer, please let me know.thanks. and smile and be happy
#5
Senior Member
Join Date: Oct 2006
Location: Jacksboro,
TN
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
RE: will these all work
that clutchbell is for a single speed and the tornado is a 2 speed so that clutchbell wont work
less teeth=quicker
more teeth=faster on topend
less teeth=quicker
more teeth=faster on topend