Will these fit
#1
Member
Thread Starter
Join Date: Dec 2006
Location: , PA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
#2
Senior Member
Join Date: Oct 2006
Location: Jacksboro,
TN
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will these fit
what are they for if there for tmaxx or anything like that they wont fit our cars have a 12mm hex you can search on ebay for hpi mt2 wheels they will fit our cars
#4
Senior Member
Join Date: Dec 2006
Location: Denver,
CO
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will these fit
do you like the sv?? is it a good truck?? i just won the game on redcatracing.com and they say i can win an sv. i wanted to get it...if i win, but i wanted to know what you think of it and what upgrades i would need. thanks.
#5
Member
Thread Starter
Join Date: Dec 2006
Location: , PA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will these fit
I dont have it yet but its on the way. And will these fit? http://www.rcplanet.com/traxxas_tire...74330_prd1.htm
#8
Senior Member
Join Date: Oct 2006
Location: Jacksboro,
TN
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will these fit
i thought about the samething but i found out they didnt make them at least thats what someone told me i found something on ebay that went on a 12mm hex and the outside was a 14mm hex but i was told it was for a rc 10 or something so that you could put the old wheels on the new car or something
#9
Member
Thread Starter
Join Date: Dec 2006
Location: , PA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will these fit
http://www.rcplanet.com/pro_line_moab_2_67489_prd1.htm what about these and if they do can some one give me a link for rims to fit?
#11
Member
Thread Starter
Join Date: Dec 2006
Location: , PA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will these fit
http://www2.towerhobbies.com/cgi-bin...?&I=LXNHX3&P=0 How bought these? And do they come pre glued?
#14
Member
Thread Starter
Join Date: Dec 2006
Location: , PA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
#19
RE: Will these fit
here are some from ebay:
http://cgi.ebay.com/New-Set-of-2-Ime...QQcmdZViewItem
http://cgi.ebay.com/Set-of-2-Imex-2-...QQcmdZViewItem
http://cgi.ebay.com/2-Imex-2-2-Chrom...QQcmdZViewItem
towerhobbies:
http://www2.towerhobbies.com/cgi-bin...&I=LXZS52&P=ML
http://www2.towerhobbies.com/cgi-bin...?&I=LXDNC4&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LXMV44&P=7
http://cgi.ebay.com/New-Set-of-2-Ime...QQcmdZViewItem
http://cgi.ebay.com/Set-of-2-Imex-2-...QQcmdZViewItem
http://cgi.ebay.com/2-Imex-2-2-Chrom...QQcmdZViewItem
towerhobbies:
http://www2.towerhobbies.com/cgi-bin...&I=LXZS52&P=ML
http://www2.towerhobbies.com/cgi-bin...?&I=LXDNC4&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LXMV44&P=7
#21
Member
Thread Starter
Join Date: Dec 2006
Location: , PA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will these fit
http://www.rcplanet.com/pro_line_moab_2_67489_prd1.htm
Are these higher than the wheels that come on my stock Volcano Sv?
And do bigger wheels=slower speeds?
Are these higher than the wheels that come on my stock Volcano Sv?
And do bigger wheels=slower speeds?
#22
RE: Will these fit
bigger wheels have less acceleration but higher top end speed, you could use them with the rustler rims, make sure you get 4 rear rims since the rustler is 2 wheel drive and the fronts dont have hex mounts.
#25
RE: Will these fit
i would say they are bigger, the volcano wheels are low profile those are large profile, only thing is the rims are 2.2 and volcano's are 2.8 i think.