Help for upgrade parts
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Yulee, FL
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Help for upgrade parts
I have a exceed rc xtreme buggy its the same as the redcat tornado. I want some of your advice on upgrade parts
should i change my lower arms and hubs to alum? i dont plan on changing the linkages i think i'll leave them plastic
should i use alum shocks and which springs are better
I've also read that you can put different clutch shoes on and it will eliminate the spring how well does this work
I want to put a tuned exhaust and pipe on what would be good to use.
I have hispeed h3003 servos on it now what would be a better upgrade
Is there a better Filter to use.
Finally different wheels and tires that would fit on my buggy.
Any help would be apprieciated.
should i change my lower arms and hubs to alum? i dont plan on changing the linkages i think i'll leave them plastic
should i use alum shocks and which springs are better
I've also read that you can put different clutch shoes on and it will eliminate the spring how well does this work
I want to put a tuned exhaust and pipe on what would be good to use.
I have hispeed h3003 servos on it now what would be a better upgrade
Is there a better Filter to use.
Finally different wheels and tires that would fit on my buggy.
Any help would be apprieciated.
#2
Senior Member
Join Date: Oct 2006
Location: Jacksboro,
TN
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help for upgrade parts
i would leave it plastic because it is cheaper to replace plastic and aluminum bends and for the servo i would get a hitec 645 servo because it has metal gears and is good
#4
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Yulee, FL
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help for upgrade parts
do those servos have a fast response and i have looked at a couple of different websites and they say they are for large scale rc's will it fit in my 1/10 scale buggy