head screws
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Location: fresno,
CA
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
head screws
i have a stock SV and lost one of my cooling head screws, i tried my LHS and they gave me 2.5mm screws which are too small, and then 3mm screws which were too big, any idea of what size these head screws are, they keep giving me the wrong ones[&o]
#2
Senior Member
My Feedback: (3)
Join Date: Jul 2004
Location: Norwood,
OH
Posts: 22,101
Likes: 0
Received 0 Likes
on
0 Posts
RE: head screws
have you tried taking one of the remaining screws in to match it up? the VX18 should use either a 2mm or 2.5mm screw.
you'll also want to double check the thread pitch and make sure they match.
you'll also want to double check the thread pitch and make sure they match.
#4
Senior Member
RE: head screws
Ace the helpful hard wear man. Most of them have any screw,bolt,nut,washer,ect,ect and they can tell you the pitch and the thread fine or what ever it is. Hope it help's now have fun and enjoy life's way to short